StillSmart

Re: t500 hosepipe mod

2011-12-02T11:46:53+00:00

easy way to connect the needle valve to 15mm copper 3/8 male iron to 15mm copper,

Statistics: Posted by alan — Fri Dec 02, 2011 11:46 am

Re: t500 hosepipe mod

2011-10-21T21:33:44+00:00

A not-quite-as-pretty little brother version of i can't drink's hose mod.

A glass of scotch, a glue gun, a reel of hose and 5 minutes gave me this result. It's watertight; let's hope it lasts!

Statistics: Posted by shoutingsoup — Fri Oct 21, 2011 9:33 pm

t500 hosepipe mod

2011-10-17T16:18:44+00:00

hi all..

i did this mod to my t500 water control thingy and it works a treat!..

all i did was solder a piece of standard 15mm copper pipe to the supplied adaptor(that fits hardly anything) and viola!...

all i do now is to push the hosepipe onto the end and turn the water on but not too fast or it will blow off!.... i have found that i can control the water perfectly by turning the
t500 water adjuster on to its fullest setting and then turning the hose tap down to a decent trickle but too fast for the t500's recomended 400 ish ml per min, and then adjusting the adjuster until i reach the desired water flow and temp on the t500..

hth
al.

Statistics: Posted by i dont drink — Mon Oct 17, 2011 4:18 pm