Does ♲ work ? Yes, it seems to ☻, and the logic behind it makes sense as well.
The basic idea being that you rinse all the tiny carbon pellets out of the filter housing and then strain off any liquid that comes out. Then in a bowl (heat resistant) pour a kettle full of boiling water on the carbon pellets/granules, let it stand for a little while (while you're reboiling the kettle), then you strain the carbon pellets/granules and rinse them in cold, then more boiling water, etc etc. ☻
I think he recommends to do that 5 times. The idea being that boiling water from a kettle should dilute any of the nasties ☠ that the carbon has absorbed (as 100 degrees C boiling water should be enough to dissolve ♨ the absorbed nasties ☠) - though you wouldn't want to boil them continuously as they do start to deteriorate - then once you've completed the cycle as recommended, you put the pellets/granules on a flat baking tray and heat them through in the oven to completely dry them out and bingo, use them again but topping up with a small amount of fresh unused ones as you will lose a small amount though dropping and some of them breaking up etc.
It seems to work fine and is now what I do every time I think that the filter needs cleaning out etc.... ☻
regards
P. ☮Statistics: Posted by Phantom — Sun Oct 17, 2010 7:49 pm
]]>