When it comes to wines etc, I haven't tried it for that. I use an air/easy/smart still for that. But I suggest you get a series of glass jars, mark them up with numbers and work out where the level is for something like 200 mls. Then as you run the wine, every time you fill to the pre-marked levels you put another jar under the spirit outlet. Then once the still stops running or goes to far above the normal operating temps you can then smell and taste the difference between heads hearts and tails. The fact its a reflux still make it likely that it'll be a bit harder to tell where the cuts are, but it'd be good training.
With sugar turbos, the different fractions are much harder to smell/taste as the sugar has already been refined. I find it best to make a wash with tap water, run it, then let it down to 40% or less with RO water (from the aquarium shop - no minerals) and then re-distill. The distillate is then let back dow to exactly 40% again with RO water, before being carbon filtered.
I'm further east but the tap water is hard and full of chalk/calcium and magnesium salts. By letting it down with RO and then letting the final distillate down with RO you don't seem to get much, if any of the harsh taste that can result from using hard tap water.
My neutrals do seem to come out clean and smooth. Ideal to use with commercial flavourings.Statistics: Posted by Phantom — Mon Jan 21, 2013 1:32 pm
]]>