StillSmart

Re: Parrot Parts

2017-03-22T23:34:37+00:00

We are here to please/help/complicate the best we can

Robert.

Statistics: Posted by Easydrinker — Wed Mar 22, 2017 11:34 pm

Re: Parrot Parts

2017-03-22T14:05:08+00:00

Cheers gents.

Statistics: Posted by Chubbs — Wed Mar 22, 2017 2:05 pm

Re: Parrot Parts

2017-03-22T06:31:24+00:00

You could make it easier to solder with a 22mm 10mm tee at the bottom.

... And for the support arm for that matter. Cut in half and filled.

Statistics: Posted by Mash — Wed Mar 22, 2017 6:31 am

Re: Parrot Parts

2017-03-22T00:26:24+00:00

download/file.php?id=324

Yes, for some reason, this pdf was hard to link to.
I hope that it works for you.
Shout up if it doesn't.
It may not be the best parrot, but is certainly a working one,

Robert.

Statistics: Posted by Easydrinker — Wed Mar 22, 2017 12:26 am

Re: Parrot Parts

2017-03-22T00:22:29+00:00

From the Board Index go to 'Resources', then on to 'Distilling Booklets',
then choose 'Parrot Parts' to download.

viewtopic.php?f=7&t=3436

Statistics: Posted by Toper — Wed Mar 22, 2017 12:22 am

Re: Parrot Parts

2017-03-21T19:55:16+00:00

Evening chaps.

Would somebody please point me in the right direction for the parrot parts list please.

Been looking throughout the site for a while and the link above is no longer clickable.

Cheers.

Statistics: Posted by Chubbs — Tue Mar 21, 2017 7:55 pm

Re: Parrot Parts

2012-03-15T19:35:30+00:00

I made the wooden base for that one was so that the parrot would reach the outlet at the end of my condenser but I've since decided to make something a little more practical.

I'm building a smaller parrot to attach directly to the end of the Liebig outlet. It will have with a small air vent like below.

Having the parrot on it's own stand, then the still on it's own and the collection vessel on its own was just too messy. The new design will simplify things greatly.

One still complete with integral parrot (when required) and DJs for collections.

AM

Statistics: Posted by Almanac — Thu Mar 15, 2012 7:35 pm

Re: Parrot Parts

2012-03-15T17:57:20+00:00

I like the idea of a wooden base. It'll keep it nice and stable and purely from an aesthetic point of view think it contrasts really well against the shiny copper.

I'm looking forward to designing and building mine, there's so much inspiration like this around and a real scope to try out something creative without risking loads of expensive copper if it doesn't work.

Statistics: Posted by Still Not There Yet — Thu Mar 15, 2012 5:57 pm

Re: Parrot Parts

2012-03-12T12:01:27+00:00

Here's my latest parrot built for my 50lt still.

AM

Statistics: Posted by Almanac — Mon Mar 12, 2012 12:01 pm

Parrot Parts

2012-03-12T11:59:17+00:00

This pdf on making your own parrot was maliciously deleted by a now banned member. It is restored here in the hope that it may be useful to others.

Parrot Parts List.pdf

AM

Statistics: Posted by Almanac — Mon Mar 12, 2012 11:59 am