Heres what I have been up to,
I have decided to distill the original AlcoTec Tripple Still wash I originally made, I had already done the turbo express 24hr one I had started after but finished first, and was very impressed with it.
This Tripple Still with the carbon was not good, Whilst it cleared as in all the solids fell out of suspension it did not really fall bright and had quite a bit of fine carbon in it.
So Heres what I did, I loaded up 4Ltrs of wash and ran it till I had 800ml & put that into a demijohn and labled it heads as I did not discard any. I carried on till the distillate fell to 30% about, put that into another DJ and called that one tails.
I threw the rest from the still away and re-filled with wash, and did the same. Then I re-distilled the tails untill I got 75%, and put that into another DJ.
Now I am about to distill the heads, get the maximum out I can and combine that with the re-distilled tails.
Ok, so I will have about 3Ltrs (estimate) of 75% super clear distilate, its not been carbon filtered and all the heads have been left it.
The is 'How much' heads should I discard on my final run ? and this time I am going to run it through carbon, I might even filter it a second time though a carbon chamber I have for a cleaner taste.
Regards
IanStatistics: Posted by umpa — Sat Jan 03, 2009 12:11 am
]]>