StillSmart

Cleaning the T500

2011-04-08T12:21:35+00:00

on my essencia still (copper scrubbers in collium) i just use a boiling citric acid solution, then drain away @ 40degrees and rinse through. but for ceramics i use coke

Statistics: Posted by foRUM warrior — Fri Apr 08, 2011 12:21 pm

Cleaning the T500

2011-04-06T02:20:02+00:00

i use a tin of coke for the saddles and lemon juice for the copper hope this helps.

Statistics: Posted by MARBAKER — Wed Apr 06, 2011 2:20 am

Cleaning the T500

2011-04-04T13:00:22+00:00

Thanks CC

Statistics: Posted by Andy — Mon Apr 04, 2011 1:00 pm

Cleaning the T500

2011-04-04T01:56:15+00:00

I just boil the copper in a pan with some water and vinegar. When I ran some wash that wasn\'t dry and it was really smelly, I used some hydrogen peroxide that I use for sterilising stuff in the greenhouse on the ceramic saddles. That worked great.
I normally now just part fill the boiler after a spirit run with water, and run it without any cooling, the steam does a good job of cleaning it up. I have however replaced the spirit hose coming off the condenser with some 1/4â€

Statistics: Posted by Capt-Cudellez — Mon Apr 04, 2011 1:56 am

Cleaning the T500

2011-04-03T09:52:53+00:00

I have just pulled my 500 apart to clean the saddles.

What a pain separating the copper from the saddles but got it done.

Whats the best way of cleaning??

Statistics: Posted by Andy — Sun Apr 03, 2011 9:52 am