That ferment was pitched on 06 Nov and finished bubbling on or about 10 Nov. There being no activity for 24 hours I degassed it on 11 Nov and turned the temperature control off. The temp quickly dropped to 12oC and I left it until today to start getting it ready for stripping.
The usual procedure for me would be to rack off to another container, trying hard not to disturb and transfer any of the lees, and leave the second container to clear for a few days too. I'd also recharge the fermenter and get the yeast started again.
Today I was to rack off the beer to a second container but this wash was dark chocolate brown and I couldn't see the end of the syphon even though it was only just below the surface of the beer. This meant I wouldn't be able to see the yeast cake and avoid getting some of it sucked into the syphon.
I carefully watched the tube on my auto-syphon for the first signs of any sediment so I could pull out the syphon and leave the yeast cake undisturbed but, to my amazement, I was able to syphon off the entire wash, all 55Lt of clean, crystal clear, dark brown beer, and no lees. I even tilted the fermenter to get the very last few drops and the yeast cake never moved.
I've always had to leave the last few litres behind so as to keep the beer clean going to the boiler but this wash and yeast have really opened my eyes. 40Lt of the beer went straight to my boiler, instead of having to wait days to clear completely, and I've even pressed my trusty Airstill into service to help with stripping the balance.
As soon as the boiler was on I was able to top up the yeast cake with some lukewarm water and preheated another batch of stored wort, and a 4lt yeast bomb, in my plastic boiler to standard pitching temp, aerated the hell out of it and got the yeast cake back to work.
It may seem like a little thing but being able to rack straight from fermenter to boiler is new to me and I'm really happy as it's made the process shorter and cleaner.
AM 
Statistics: Posted by Almanac — Sun Nov 18, 2012 3:10 pm
]]>