StillSmart Home distillation made easy! 2013-04-18T11:26:34+00:00 http://www.stillsmart.co.uk/forum/feed.php?f=2&t=2039 2013-04-18T11:26:34+00:00 2013-04-18T11:26:34+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=2039&p=13320#p13320 <![CDATA[Re: Potato mash]]>
On the other thing, done that ;)

AM 8)

Statistics: Posted by Almanac — Thu Apr 18, 2013 11:26 am


]]>
2013-04-18T11:14:15+00:00 2013-04-18T11:14:15+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=2039&p=13318#p13318 <![CDATA[Re: Potato mash]]> Statistics: Posted by Distillingchris — Thu Apr 18, 2013 11:14 am


]]>
2013-04-18T11:04:13+00:00 2013-04-18T11:04:13+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=2039&p=13317#p13317 <![CDATA[Re: Potato mash]]>

If you have an electric juicing machine, one of the high speed shredding types, and you juice the spuds and then heat the potato juice to around 67oC before adding either malted grains (for 10kg of spuds add 1 kg of malted barley) or powdered Alpha & Gluco Amylase per manufacturers instructions.

This should give you a useable, if low, yield but it should be remembered that potatoes were only used as base material for distilling where there was nothing else available or affordable to the poor people who used them. :(

Malted Barley is relatively cheap and provides a much higher yield for your buck ;)

AM 8)

Statistics: Posted by Almanac — Thu Apr 18, 2013 11:04 am


]]>
2013-04-18T10:11:22+00:00 2013-04-18T10:11:22+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=2039&p=13315#p13315 <![CDATA[Re: Potato mash]]> Statistics: Posted by DullahanBrewing — Thu Apr 18, 2013 10:11 am


]]>
2013-04-18T08:37:34+00:00 2013-04-18T08:37:34+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=2039&p=13311#p13311 <![CDATA[Potato mash]]>
1st boiled 9kg of potatoes, holding the temp at different stages of the course of an hour, then retaining the water. Did the iodine test and starch was present, added the amalyse , tested with iodine again later and showed there was less/no starch, tested with hydrometer this morning and got a reading of 1.005, which is pretty much not worth it and will probably tip as it works out to about 1% abv.

2nd boiled 9kg of potatoes until soft, then mashed them together, tipped the water away and refilled with clean water, then put the mashed potatoes back in and mixed, brought temperature up to 65*c and added pale rye malt and mixed for 2 hours then let cool overnight, tested with hydrometer this morning and got a reading of 1.022 which would give about 3%, would it be worth adding sugar and yeast to get bout 10% then put through the still as normal ? Or just tip away ?

Statistics: Posted by Distillingchris — Thu Apr 18, 2013 8:37 am


]]>