I think I've mastered running my home made Boka, I packed the column with 1 stainless scrubber, pushed up to under the plates, then filled it with 2Kg of 6mm ceramic raschig rings, I filled it with 25litres of lentil wash at 12%.
Once it got up to temp I lowered the power by 25% to 2250watt and after a little stabilisation time, opened the valve a tiny bit, it's now been running for almost 2 hours, the collection rate is slow (250ml every 35 mins) but it's a consistent 93% and the temp probe has been stable at 81.8°c the hole time, slow but so far so good.
Because I'm using a 12% wash for a spirit run, can anyone advise roughly what cuts I should make between heads, hearts and tails?
So far I have collected 3 jars of 250ml, I'm pretty sure I'm into the hearts now but would like a little advice please?
I'm assuming the hearts will be cleaner than my first attempt which involved stripping on the boka, watering down to 30% and spirit runs on an airstillStatistics: Posted by Anavrin — Sun Jul 06, 2014 6:03 pm
]]>