StillSmart

Re: why does it take 11 hours for a run????

2012-08-22T02:03:52+00:00

okay guys i did a run today with lot better results. i gave the column a good shake to make sure it was not obstructed. i ran it at top temp 78.5 and the bottom temp betwwen 64-65 c the whole time and got 4 L at 93% in 4.5 hours. ill take it!

Statistics: Posted by danmiz — Wed Aug 22, 2012 2:03 am

Re: why does it take 11 hours for a run????

2012-08-18T05:06:41+00:00

thanks guys. ill run it tuesday and let you know the results. ill get some nudey magazines just in case.

Statistics: Posted by danmiz — Sat Aug 18, 2012 5:06 am

Re: why does it take 11 hours for a run????

2012-08-17T19:58:24+00:00

all good advice there, I'd give the column a good hard shake to free up any packing blocking the output, failing that run hotter as Mr Cat suggested, if your product is in the right ABV range then the probe is probably off - I'd change the batteries for a start just to rule one other thing out.

Statistics: Posted by Capt-Cudellez — Fri Aug 17, 2012 7:58 pm

Re: why does it take 11 hours for a run????

2012-08-17T17:43:17+00:00

Better stock up on mens magazines.

Statistics: Posted by John51 — Fri Aug 17, 2012 5:43 pm

Re: why does it take 11 hours for a run????

2012-08-16T03:51:25+00:00

thanks for replies guys. the hoses are where they belong for sure. im going to tap my column and run it hotter this week and see how long it takes. sure do hope i fix ths cause 11 hours is a long time to seat in my bathroom.

Statistics: Posted by danmiz — Thu Aug 16, 2012 3:51 am

Re: why does it take 11 hours for a run????

2012-08-15T19:30:09+00:00

From the temp that you said you were running at (58) you have the hoses the right way around. Unless your cold water is actually at 58 degrees centigrade !!

Statistics: Posted by MrCat — Wed Aug 15, 2012 7:30 pm

Re: why does it take 11 hours for a run????

2012-08-15T18:36:13+00:00

doesn't mater what length of hose you use, but the water should go into the product condenser, and exit the side of the column where the temp probe housing is.

Statistics: Posted by Capt-Cudellez — Wed Aug 15, 2012 6:36 pm

Re: why does it take 11 hours for a run????

2012-08-15T17:45:02+00:00

Whimpy. I assume I have them hookup correctly. Does it matter the long hose is on the intake and shorter hose is outlet? The book and video say two different things.

Statistics: Posted by danmiz — Wed Aug 15, 2012 5:45 pm

Re: why does it take 11 hours for a run????

2012-08-15T17:32:26+00:00

Hi I Had same problem with T500.... Check that you've got yr inlet and outlet hoses the right way round..... admiral suggested this to me and found out this was the problem as well as the finicky column

Cheers

Whimpy

Statistics: Posted by Whimpy64 — Wed Aug 15, 2012 5:32 pm

Re: why does it take 11 hours for a run????

2012-08-15T15:05:17+00:00

Thanks for the info mc. I'll try and run it hotter and see how it comes out.

Statistics: Posted by danmiz — Wed Aug 15, 2012 3:05 pm

Re: why does it take 11 hours for a run????

2012-08-15T09:40:25+00:00

I just remembered this thread

http://www.stillsmart.co.uk/forum/viewtopic.php?f=12&t=1063

Admiral Toad increased the speed of the output on his by tapping the packing back down the column to open up some space above the coil.

Statistics: Posted by MrCat — Wed Aug 15, 2012 9:40 am

Re: why does it take 11 hours for a run????

2012-08-15T09:38:58+00:00

You could let it run a bit warmer and collect faster. There is no guarantee that your thermometers are reading correctly.

There is a trade off between speed and purity though - I guess you are getting a drop a second or there about?? Run it a little hotter and decide what you want

Statistics: Posted by MrCat — Wed Aug 15, 2012 9:38 am

why does it take 11 hours for a run????

2012-08-15T03:47:18+00:00

hi all! ive just completed my 3rd run on my t500 and dont understand why it takes me 11 hours to collect 3.6L of 95%. every post ive read it takes everyone only 4-5 hours to run a 25l wash. any advice on what im doing wrong will be appreciated. BTW im running it at about 58 C.

Statistics: Posted by danmiz — Wed Aug 15, 2012 3:47 am