StillSmart Home distillation made easy! 2017-10-17T21:45:26+00:00 http://www.stillsmart.co.uk/forum/feed.php?f=4&t=4670 2017-10-17T21:45:26+00:00 2017-10-17T21:45:26+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=45044#p45044 <![CDATA[Re: dodgy repacement filter ?]]> Someone might find it of use.

Robert.

Statistics: Posted by Easydrinker — Tue Oct 17, 2017 9:45 pm


]]>
2017-10-16T15:01:23+00:00 2017-10-16T15:01:23+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=45020#p45020 <![CDATA[Re: dodgy repacement filter ?]]> have modded as follows .
first cut the nylon threaded part off the carbon filter (see photo) next drill a hole through the top to allow a stainless steel bolt to pass through the filter.i used an 8mm bit.
i then drilled the threaded nylon part the the carbon filter used to screw into in the top holding vessel again 8mm bit.so now the the nylon vessel that holds the spirit now has 2 holes in it one for the ceramic and one for the carbon filter (see photo) all you need now is a stainless steel bolt M8 with a low profile head and a low profile nut along with a stainless washer and a silicone (food grade) washer to seal the top vessel.the bolt had to be trimmed down (hacksaw) by a couple of threads so as to clear the bottom of the collection vessel ,if this is slightly too long the top holding vessel will not sit onto the top lip properly.the bolt needs to be inserted from the holding (top vessel) along with a silicon sealing washer before attaching the ceramic filter,then its a simple matter of popping on the stainless washer and the low profile nut onto the bottom of the carbon filter and just nip it up very sightly this will give a great seal on the orange oring only a tiny bit over finger tight (we dont want to break the holding vessel) job done.. :)
The Bolt was M8 130mm long, the nut was half/thin hexagon stainless M8 (low pfofile),and the silicone washer and stainless washer all off ebay .Hope this helps some of you out .If you want the links just ask.
Image

Image

Image

Image

Statistics: Posted by ninja_geezer — Mon Oct 16, 2017 3:01 pm


]]>
2017-10-15T22:16:23+00:00 2017-10-15T22:16:23+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44998#p44998 <![CDATA[Re: dodgy repacement filter ?]]> I think that says it all.

Opinions are like arseholes, we have all got one. ;D

Robert.

Statistics: Posted by Easydrinker — Sun Oct 15, 2017 10:16 pm


]]>
2017-10-14T18:43:19+00:00 2017-10-14T18:43:19+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44967#p44967 <![CDATA[Re: dodgy repacement filter ?]]>
Said basically as I've never tried ANY turbo, so may be lacking knowledge there, doubt it tho'.
Otherwise, in line with what Mash says.

If I wanted to invest money in my distilling operation there are things other then filtering I'd be looking at, even tho' the filter of choice does appear to be available off the shelf here.
I'm not hung up on any one way Robert, just that after some 17 years or so of practising this craft I'm happy with my lot.
Mr. Walker who posts here uses VS and filters and swears by his product. I respect that.

As your signature says ;)

Statistics: Posted by packapoo — Sat Oct 14, 2017 6:43 pm


]]>
2017-10-14T05:52:22+00:00 2017-10-14T05:52:22+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44962#p44962 <![CDATA[Re: dodgy repacement filter ?]]>
ninja_geezer wrote:
packapoo wrote:Gotta love it....

This thread keeps reminding me how glad I am that I don't need to filter.... ;D

Why dont you filter surely it can only improve your spirit ?


I can answer that.
Filtering could be considered as a corrective treatment for a fault with a fermentation.
Tried Turbos, they need filtering.
Went through a series of natural washes. As the ferments got cleaner the requirement to filter waned. Culminating in the kale wash, which imo is clean enough so it doesn't need it.

Statistics: Posted by Mash — Sat Oct 14, 2017 5:52 am


]]>
2017-10-13T23:20:31+00:00 2017-10-13T23:20:31+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44958#p44958 <![CDATA[Re: dodgy repacement filter ?]]> HA66 is an automotive gasket sealant considered safe for use in aquariums.
Freely available on the bay.
That first caught my eye.
I bought some, extruded into 96% spirit and looked for changes.
Didn't see any, downloaded the Health and Safety PDF, read it, and decided that if it was safe for Guppies, then I would risk it.
It has become my go to sticky stuff, far safer than most 'food grade' silicones that contain 'fungicides'.

Packs', Ninja has a point.
Don't get hung up on the way of thinking of certain forums.
I will admit that it is subjective.
Sometimes I produce neutral spirit that tastes like water.
When I filter it, it is just like 45% ABV water, only more so.
What does my signature say? ;)

Robert.

Statistics: Posted by Easydrinker — Fri Oct 13, 2017 11:20 pm


]]>
2017-10-12T20:55:11+00:00 2017-10-12T20:55:11+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44952#p44952 <![CDATA[Re: dodgy repacement filter ?]]> i will take some pictures and put a how to on here when im happy with its performance.its on test currently filtering some spirit. ;D

Statistics: Posted by ninja_geezer — Thu Oct 12, 2017 8:55 pm


]]>
2017-10-12T20:48:47+00:00 2017-10-12T20:48:47+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44951#p44951 <![CDATA[Re: dodgy repacement filter ?]]>
packapoo wrote:
Gotta love it....

This thread keeps reminding me how glad I am that I don't need to filter.... ;D

Why dont you filter surely it can only improve your spirit ?

Statistics: Posted by ninja_geezer — Thu Oct 12, 2017 8:48 pm


]]>
2017-10-11T21:09:44+00:00 2017-10-11T21:09:44+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44938#p44938 <![CDATA[Re: dodgy repacement filter ?]]>
This thread keeps reminding me how glad I am that I don't need to filter.... ;D

Statistics: Posted by packapoo — Wed Oct 11, 2017 9:09 pm


]]>
2017-10-11T07:28:34+00:00 2017-10-11T07:28:34+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44936#p44936 <![CDATA[Re: dodgy repacement filter ?]]> i am thinking of trying some of this stuff..
https://www.amazon.co.uk/Dow-Corning-786-Silicone-Sealant/dp/B0065K4WV2

Statistics: Posted by ninja_geezer — Wed Oct 11, 2017 7:28 am


]]>
2017-10-10T21:58:33+00:00 2017-10-10T21:58:33+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44927#p44927 <![CDATA[Re: dodgy repacement filter ?]]> I cleaned, dried applied HA66 and a few small Stainess self tappers, it is currently working fine.
Bodging stuff is second nature to me.
I will cheerfully replace if needed.
Hope not to.

Robert.

Statistics: Posted by Easydrinker — Tue Oct 10, 2017 9:58 pm


]]>
2017-10-10T19:35:39+00:00 2017-10-10T19:35:39+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44925#p44925 <![CDATA[Re: dodgy repacement filter ?]]> i am waiting on some bits along with stainless bolt a stainless low profile nut.
and some silicone food grade washers.
i plan to adapt the filter and the housing using these.
i will let you know how the conversion goes as and when i get the bits and get round to doing it.
if it works great if not ive fucked my essencia... ;D

Statistics: Posted by ninja_geezer — Tue Oct 10, 2017 7:35 pm


]]>
2017-10-10T17:28:34+00:00 2017-10-10T17:28:34+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44922#p44922 <![CDATA[Re: dodgy repacement filter ?]]>
Question - sorry if this sounds stupid - is the orange-coloured O-ring in it's place? If it isn't, your filter will leak whatever. As I've never tried to assemble my Essencia without the O-ring, I don't know whether if you leave the ring out, it will fully tighten or not. If you see what I mean.

If the O-ring is there, then as ED put it, you may be screwed, unlike your filter. Lots of PTFE?

I'd be tempted to take the old filter, remove the spider (See separate thread) from this and the new one, dump the old carbon and transfer the contents of the new cartridge into the old (presumably snugly fitting) one.

Cheers

Hampk

Statistics: Posted by hampk — Tue Oct 10, 2017 5:28 pm


]]>
2017-10-10T04:34:16+00:00 2017-10-10T04:34:16+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44910#p44910 <![CDATA[Re: dodgy repacement filter ?]]> I cannot think of a single word of help.
We now rely upon you to show us the way.

Robert.

Statistics: Posted by Easydrinker — Tue Oct 10, 2017 4:34 am


]]>
2017-10-09T21:12:25+00:00 2017-10-09T21:12:25+00:00 http://www.stillsmart.co.uk/forum/viewtopic.php?t=4670&p=44906#p44906 <![CDATA[dodgy repacement filter ?]]> no ive not cross threaded it before you ask .ive even tried a bit of ptfe tape but no joy.so it constantly leaks and will not make a seal.
has anyone managed to make any changes or adapt the nylon threaded parts in any way.i am always uber careful with plastic/nylon threads anyway.
ive examined the threads closely and the look ok just will not nip up at all.... :(

Statistics: Posted by ninja_geezer — Mon Oct 09, 2017 9:12 pm


]]>