StillSmart

Its started to come out at 70%, how do I do I get the recommended 40% turn the water up?

When doing a strip run you take all the spirit until it comes off @ 20%.

thanks vino, its now at 50% but the spirit is coming out warm so will read higher.

Run it as an experiment. Note what goes in and comes out, adjust water flow or whatever you can. Don't drink the first or last. Sip the middle or dip finger and taste. Leave it a day to breathe. Water to 30% and run it again if it's vile.

Its not vile it tastes quite good, got just over a gallon at 55%, stopped when at 20% it was starting to taste ropey..

That's the taste of tails mate .
Not nice.

If that was a strip, then I can promise that it will taste better after a dilute to around 30% and a spirit run.
Make cuts,save the heads and tails for another day.
Just sayin'

Robert.

cheers, will save the hearts for my gin

good man

looked for a recipe for soaking the botanicals in 2 strips to go through the alembic pot still. Just need the quantity for 2 x 5 gallon strips. What amounts to put in for thr gin run and what botanicals.

Odin's recipe is highly regarded I believe

http://homedistiller.org/forum/viewtopic.php?f=14&t=48668

Boodles

http://www.stillsmart.co.uk/forum/viewtopic.php?f=16&t=4330

Sputnik recipes

http://www.stillsmart.co.uk/forum/viewtopic.php?f=16&t=4060

Curmudgeon, You seem to have found your way around this site and taken it all in.
You are now dishing out bonzer advise and with links...
What can I say?
Other than so happy that you are here.


Robert.

I'm still a newbie, but appreciate the welcome I was given and will help as best I can.