StillSmart

Posted: **Sun Mar 16, 2014 5:10 pm**

I managed to make a start on building my pothead following the plan & photo of VT's build.

The BIG problem was my pipe cutter don't go big enough for a 2" pipe. So I used the disc cutter...so what...it worked out ok.
So I now have the column...all I need to do now is complete the liebig and I'm ready.

All it needs is the buffer mop and "it'll shine like the top of the Chrysler building"

Posted: **Sun Mar 16, 2014 10:13 pm**

Blimey BJ, you don't waste any time mate

Posted: **Mon Mar 17, 2014 6:22 am**

Cheers Fuf..

I've had the pipe & fittings for a week or two now, I just want to get into making something with a bit more taste. The swmbo & me have had enough vodka for a while.

The build is very easy it's just a case of making sure all the joints are nice and clean before you start to solder.

Posted: **Sat May 10, 2014 11:30 am**

Taken longer than I thought but I'm almost there...I spent yesterday soaking the column and liebig in a bucket of citric acid to clean off all the crap...it's now got a bit of a shine...all it needs now is a quick polish.

I thought I'd got a 45% elbow to change the angle of the dangle in my box of bits but no...so I'll have to get one...

It fit's the boiler ok so all I need now is a quick vinegar run.

and a cleaner wash.

Posted: **Sat May 10, 2014 7:24 pm**

Nice job BJ

Posted: **Sat May 10, 2014 7:42 pm**

Cheers Fuf....I think you'll get yours up & running before me mate.

Posted: **Sun May 11, 2014 6:17 am**

Well done mate, hope you have fun.

StillSmart

Building Vino Tinto's Pothead.

Building Vino Tinto's Pothead.

Re: Building Vino Tinto's Pothead.

Re: Building Vino Tinto's Pothead.

Re: Building Vino Tinto's Pothead.

Re: Building Vino Tinto's Pothead.

Re: Building Vino Tinto's Pothead.

Re: Building Vino Tinto's Pothead.