What I Did Today
Re: What I Did Today
Scotchathon....
yesterday (of course) two mates and I did repeat samples of (in no particular order)
Glendronach 15yo
Dalmore 12yo
Lagavulin 16yo
Laphroaig Triple wood cask strength
Frank's FSW
Scarecrow's Single Malt
Rumdrinker's (he's not here yet) heavy oak Scotch
and the winner is.......
my two mates and I
yesterday (of course) two mates and I did repeat samples of (in no particular order)
Glendronach 15yo
Dalmore 12yo
Lagavulin 16yo
Laphroaig Triple wood cask strength
Frank's FSW
Scarecrow's Single Malt
Rumdrinker's (he's not here yet) heavy oak Scotch
and the winner is.......
my two mates and I

-

Frank - Senior Distiller

- Posts: 284
- Joined: Sat Mar 05, 2011 1:04 pm
- Location: On my laptop, in my campervan, travelling.
- Stills: Potstill,LM Boka
Re: What I Did Today
Well done to you and the mates Frank.
-

emptyglass - Newcomer
- Posts: 18
- Joined: Fri May 31, 2013 4:41 pm
Re: What I Did Today
seems like it was a good day to finish some of the ROBO-RUM,, last wash stripped and run for the cuts,,
looks like the summer will have plenty of good spirits around,, all we need is some warm weather,, he says as the fog from the North Atlantic rolls in,,,,,
looks like the summer will have plenty of good spirits around,, all we need is some warm weather,, he says as the fog from the North Atlantic rolls in,,,,,
All roads lead to rum!!
-

KerryW - Experienced Distiller

- Posts: 141
- Joined: Mon Feb 04, 2013 12:19 am
- Location: in a shack on Cape Breton Island
- Stills: Air Still & T500
Re: What I Did Today
Today I found out that it is bloody impossible to de-solder a 2" copper fitting.
I thought that I would be able to recycle a couple of old fittings but with my torch I could not get the whole joint at melting poin at the same time. I heated up one section of the joint and when I moved onto the next bit the first one promptly solidified . I tugged and twisted the joint with a pair of pliers but by now the fitting was so soft it just bent and distorted.
I eventually cut the fittings out with a hacksaw and threw them in the scrap bin.
I thought that I would be able to recycle a couple of old fittings but with my torch I could not get the whole joint at melting poin at the same time. I heated up one section of the joint and when I moved onto the next bit the first one promptly solidified . I tugged and twisted the joint with a pair of pliers but by now the fitting was so soft it just bent and distorted.
I eventually cut the fittings out with a hacksaw and threw them in the scrap bin.
- YHB
- Master Distiller

- Posts: 973
- Joined: Sun Oct 23, 2011 1:55 pm
Re: What I Did Today
Yesterday set the last fermentation tank to working. Last one for a while anyway. Now going to take a break and head up the West Coast (on the Gulf of Tonkin)to a resort for a day of beach cricket, swimming, BBQ and spend the night. Back tomorrow.
-

RumJohn - Master Distiller

- Posts: 606
- Joined: Thu Dec 20, 2012 2:21 am
- Location: Sanya, China
- Stills: Homegrown
Re: What I Did Today
Just noticed where you are. That is a pretty part of the world. My wife is from Northern Thailand. Enjoy!
-

chill - Master Distiller

- Posts: 1660
- Joined: Tue Mar 13, 2012 4:46 am
- Location: We(s)t Coast of Canada
- Stills: Easy Still
Re: What I Did Today
With the first Tropical storm of the Atlantic bearing down on us, (we live on the east coast of Canada) it seemed to be a wet dreary day,
So no washes to do cept the laundry, I have decided to enjoy a few tipples of the rum I have created,, the silver is nice with a good slice of lime and a dash of cola.. Tropical storm Andrea is moving off and the winds are beginning to die dowm, hopefully the rest of the summer will only bring a few storms,,,
CHEERS
So no washes to do cept the laundry, I have decided to enjoy a few tipples of the rum I have created,, the silver is nice with a good slice of lime and a dash of cola.. Tropical storm Andrea is moving off and the winds are beginning to die dowm, hopefully the rest of the summer will only bring a few storms,,,
CHEERS
All roads lead to rum!!
-

KerryW - Experienced Distiller

- Posts: 141
- Joined: Mon Feb 04, 2013 12:19 am
- Location: in a shack on Cape Breton Island
- Stills: Air Still & T500
Re: What I Did Today
Heres hoping for a nice summer for once and many rum drinks!
-

chill - Master Distiller

- Posts: 1660
- Joined: Tue Mar 13, 2012 4:46 am
- Location: We(s)t Coast of Canada
- Stills: Easy Still
Re: What I Did Today
Back from a great run up the coast to a new resort development. Too hot for cricket so we packed it in after one innings and hit the pool. That was like swimming in a hot bath.
BBQ Sat night put on for the team. The hotel provided beer but they are not actually open yet so nothing hard. I just happened to have taken some rum and mango flavored vodka. The guys from Nepal consumed huge quantities. A good time had by all.
BBQ Sat night put on for the team. The hotel provided beer but they are not actually open yet so nothing hard. I just happened to have taken some rum and mango flavored vodka. The guys from Nepal consumed huge quantities. A good time had by all.
-

RumJohn - Master Distiller

- Posts: 606
- Joined: Thu Dec 20, 2012 2:21 am
- Location: Sanya, China
- Stills: Homegrown
Re: What I Did Today
waited eagerly for the courier to bring me my bargain buy
a electric burco lookalike,filled it up to see how much it holds (27L/28L)
decided to give it a vineagar/water run to descale it(although it didnt need it as it was clean as a whistle),left it for an hour or so went to check it and the
kitchen was like a turkish sauna,time to clean this mess up before the missis wakes up from doing nightshift
a electric burco lookalike,filled it up to see how much it holds (27L/28L)
decided to give it a vineagar/water run to descale it(although it didnt need it as it was clean as a whistle),left it for an hour or so went to check it and the
kitchen was like a turkish sauna,time to clean this mess up before the missis wakes up from doing nightshift

-

Magnu420 - Senior Distiller

- Posts: 346
- Joined: Thu Aug 30, 2012 11:05 pm
- Location: in a house in lancashire
- Stills: Airstill + half boka
Re: What I Did Today
The only thing I did today was to take my daughter and her boyfriend to Newcastle International Airport. They are going to Tennerife for a week's holiday.
I'm really jealous.
I'm really jealous.
I Don't Drink Too Much, I Just Drink Enough.
-

Gaztops - Regular

- Posts: 36
- Joined: Thu Jun 13, 2013 7:43 pm
- Stills: Pot Still / Liebig
Re: What I Did Today
I redesigned and resoldered my parrot today. After my recent refit and re-org of my still I decided to arrange to have the strip feed directly to my low wines keg under the counter and this meant building the parrot into the countertop.
This will save me from having to collect in small jars and pouring into the keg - I always manage to spill loads on the floor
I'll post some pics when I do the first stripping run with the new setup
AM
This will save me from having to collect in small jars and pouring into the keg - I always manage to spill loads on the floor
I'll post some pics when I do the first stripping run with the new setup
AM

Almanac
- Almanac
- Senior Distiller

- Posts: 1847
- Joined: Thu Oct 07, 2010 12:09 am
Re: What I Did Today
I made beer,, yes I made beer,, We are hosting a party in 6 weeks and needed to get some home brewed beer ready,, It's going to be a Homebrew party,, unless you bring your own,,
Also made 3 litres of Apple pie to kick the party off,, Hope it works out,,
Also made 3 litres of Apple pie to kick the party off,, Hope it works out,,
All roads lead to rum!!
-

KerryW - Experienced Distiller

- Posts: 141
- Joined: Mon Feb 04, 2013 12:19 am
- Location: in a shack on Cape Breton Island
- Stills: Air Still & T500
Re: What I Did Today
not today, but yesterday I tried out my steam wand to let me mash some maize - the wand worked great, but still didn't get good conversion.

I posted over here hoping some of the US crowd will know where I am going wrong.
http://www.artisan-distiller.net/phpBB3/viewtopic.php?f=31&t=7841

I posted over here hoping some of the US crowd will know where I am going wrong.
http://www.artisan-distiller.net/phpBB3/viewtopic.php?f=31&t=7841
-

Capt-Cudellez - Donated to StillSmart

- Posts: 1139
- Joined: Tue Dec 07, 2010 12:22 am
- Location: Scotland
- Stills: SS VM, Stripper, Pot
Who is online
Users browsing this forum: No registered users and 3 guests
