StillSmart

I dont know if anyone has seen this,but I see on still spirits website and facebook page that they now make a column out of copper to fit the T500,bet that is an expensive bit of kit.

Optic.

Blimey, I bet you're right! They should definitely make a pot still head for it that switches with the column, I bet a fair few would buy it.

Jimmy
Perhaps it may be worth contacting Still Spirits,if enough people show intrest they would probably make a pot head.

Optic

http://www.greatexpectations.co.nz/shop ... enser.html

About £255 for the copper column but it looks cheaply made to me, they allready make a stainless steel pot still head but dont export it over here maybe Richard at wineworks could get them?
Cheers

http://www.smugglers.net.au/index.php?p=1_54

Aye Bill I would be interested in one of those SS ones asuming they would go on the T 500, not being as adapt at making things as some of our compatriots on the forum !

Dropped a note off to Richard and to Oz to see if there's any availability over here
Cant see a head made by SS on their site

Sorry A T think ive made a mistake the stainless steel pot head ive seen for the turbo 500 is listed on the smugglers link above.i know still spirit do a pot head for the super reflux but unsure about the t 500
Cheers

Well the mob in Aussie say they will ship to UK
Investigating further and have let Richard know

It would improve the usefulness of the T500 a lot, plus you could do a stripping run without melting it!

What is you are looking for ? - If you are looking for something made of copper perhaps I can help?

Brian

Basically a pot head that would fit the T 500 something like that shown in the link on Bills post.

Scroll down it a bit and you'll see they do em for SS and esencia boilers

See what you think

AT

OK let me get back to you this time tomorrow night.

Well guys
The Aussie mob will supply the T500 potheads for about £140 plus £50/60 airmail dependent on quantity assuming about 1.6 Aussie dollars to the £. Payment by bank transfer.
Let's see how Richards and Bill get on be nice to get them 'locally'

First quick look at a Pot Head for the T500.

Looking at the various options and combinations that people offer around the world, I would choose the following.

All copper – because anyone in this forum could make it if they put their mind to it - or they know somebody who can.

500 mm high Column 42 mm dia.

A tee connection at the top of the Column

The vertical leg reduced to 22mm and left “Open” to be fitted with a bung, either silicon or cork, to act as a safety blow out feature. The bung could be plain or drilled to take a thermometer / probe.

The horizontal leg to taper down to 22mm and be fitted with a compression type joint which will allow the condenser to be rotated to give any slope

The Condenser to be a 27mm Jacket over the 22mm Product Line and be 600mm long with 15mm cooling water inlet and outlet pipes.

Looking at some installations in Australia such as this one, the connection to the T500 lid is by using a 40mm brass backing nut soldered to the base of the column – I am assuming that this nut is available in the UK, there are other options available but more expensive.




The materials for this work out at around £85 per pot. This could go up or down depending on the quantity, but this price is based making three.

The following is a sketch of what I would propose and a shopping list to go with it. If you want to make your own go for it, if you want help and advice ask for it. If you want one ready made then let me know.



Savings could be made by reducing the size of the condenser to 22mm over 15mm and some of the lengths shorter.

Toodlepip

Brian

Looks pretty good to me

What's anyone else think.