My Stills turned into a monster!!!!
Ok not quite a monster but between each spirit run (about 6 weeks as I strip four 25lt wash's first) I tinker with it in search of perfection, this is the latest incarnation, I've added a few bits I bought from StillDragon, I got some coloured hose for the cooling pipes and some thermo tee's with temperature sensors so I can monitor the temp of the cooling water through my Liebig and boka coil, I've also fitted two valves so I can independently control the cooling flow to both, I'll be adjusting the liebig to output spirit at 20°c and the boka coil to as hot as I can go without any vapour escaping the top cap, the later will hopefully help compress heads, here's a few pics






Next job after this next spirit run will be to take a hacksaw to it in order to fit some 2" tri-clamp ferrels to all the connecting parts so I can add a Dephlegmator between the packed column and the VM take off.
I use the boka slant plates and boka takeoff for fores/heads collection then switch to the VM takeoff for the hearts.
Next job after this next spirit run will be to take a hacksaw to it in order to fit some 2" tri-clamp ferrels to all the connecting parts so I can add a Dephlegmator between the packed column and the VM take off.
I use the boka slant plates and boka takeoff for fores/heads collection then switch to the VM takeoff for the hearts.
You need a lot less control and then everything will be alright