Page 1 of 1
Investing in the future

Posted:
Fri Nov 08, 2013 5:38 pm
by Admiral Toad
My wife says I'm as mad as a box of frogs
I've just ordered one of these
http://www.vigoltd.com/Catalogue/Braume ... ing-systemI know it's serious money but I an aiming to go into small scale commercial brewing etc soon so have treated it as a business expense
Will let you know how it goes with the latest bag of peated malt
Re: Investing in the future

Posted:
Fri Nov 08, 2013 7:14 pm
by Almanac
Dedication to one's craft sometimes requires serious equipment and processing grain efficiently requires something more than a big cooler box etc.
Keep us posted on how you're getting on with it
AM

Re: Investing in the future

Posted:
Fri Nov 08, 2013 7:28 pm
by Icefever
I have wanted one for a long time now, but can't justify the cost. We've just had a SPEIDEL Hydropress, so that will have to do for now.
Best of luck with setting it all up.
Re: Investing in the future

Posted:
Fri Nov 08, 2013 11:28 pm
by Easydrinker
That looks to be some nice kit AT.
I have no SOH right now to persuade,
Why am I not following this route?
Once more you lead me on,it seems.
Robert
Re: Investing in the future

Posted:
Sun Nov 10, 2013 7:49 pm
by John51
Having much experience in how much 'dead money' is involved when getting a brand new project to a satisfactory conclusion, your new toy looks value for money. You could spend £2k trying to diy it and still have a way to go.
Have fun.
Re: Investing in the future

Posted:
Wed Nov 13, 2013 8:42 pm
by Admiral Toad
Well it's landed
Must say its a nice piece of kit (if somewhat overpriced)
Just running some water through to test
Was a bit flummoxed when it seems the display is in German but think I've Sussed it now
The manual has an amusing poem about flatulence and poor beer also in German I am struggling not to wet myself with uncontrollable laughter
Hopefully a mash run this Sunday

I will report back
Re: Investing in the future

Posted:
Thu Nov 14, 2013 4:30 am
by Easydrinker
We await with baited breath AT.
I for one wish to know if it earns it's keep.
Robert.
Re: Investing in the future

Posted:
Thu Nov 14, 2013 10:24 am
by Almanac
Re: Investing in the future

Posted:
Thu Nov 14, 2013 11:42 am
by Icefever
There's a few videos on you tube that are worth a watch..
Re: Investing in the future

Posted:
Fri Nov 15, 2013 3:32 pm
by John51
I have a German friend if you need anything translated.
Re: Investing in the future

Posted:
Mon Nov 18, 2013 9:02 am
by Admiral Toad
Gave the kit its first mash this Sunday and I have to use that much overused expression 'AAAAWWWWSOME'
Put in 8kg of home ground Grist and 20 litres of water once up to first temperature Programmed it for a 10 min protein rest at 52 Degrees 60 mins main mash at 62, 30 mins at 73 and 10 mins at 78 (I think) All the while it just runs quietly away with the pump constantly pushing the wash through the grain and it tells you where you are and time left in each phase
By the end I got 20 plus litres out at 1076 og after sparging with another 4.5 litres and it seemed to drain off quite quickly the whole process took just over 3 hours no mess and a very clear wash loads of smoke smell carried through
Down side well I wish they had made it to do a full 25 litres as I still added 1.5kg of LME and some water to bring it up to volume but I can live with this. Also there quite a lot to clean afterwards but being all stainless its not too much effort
So all in all love it

Re: Investing in the future

Posted:
Mon Nov 18, 2013 2:04 pm
by John51
As the saying goes: The best bargains of your life seem overpriced on the day you bought them.

Re: Investing in the future

Posted:
Tue Nov 19, 2013 9:16 am
by Admiral Toad
Enjoyed using it so much got myself some beer brewing books and just ordered hops and malt to make Youngs Special ale
Gotta keep the kit rolling !

Re: Investing in the future

Posted:
Tue Dec 10, 2013 9:08 pm
by Voddy
Wow. I'm very interested.
I couldn't possibly afford it anytime soon, but - as you say - it's an investment for the future.
I'll be keeping this in mind for a few years.
Thanks for sharing.
Re: Investing in the future

Posted:
Sun Dec 15, 2013 1:34 pm
by amaark
AT,
Looks like a toy with possibilities.
New you've got a couple under your belt as they say, it would be appreciated if you would answer a question that I can find no information on.
I am a Bourbon Drinker, and there are the obvious issues of Maize and Gel.
I was thinking along the following lines and would it stay loose enough for a Braumeister to pump around:
Recipe
Rolled Maize / Corn 65%, Malted Barley 25%, Malted Wheat 10%. (all mixed)
Multi Step Mash
Dough in - 36 deg C (Bottom of the Gum Breaking temp range)
Beta Glucanase break, Protein break then finally the Beta Amylase break for sugar extraction.
It might all be pie in the sky, I've looked on all the usual forums and can't see anyone having tried it before or written about it.
Thanks in advance.