A useful fitting 15mm-12mm push fit adaptor
Posted: Wed Dec 03, 2014 11:30 amHi Guys
Just thought I'd share this, if anyone's using or going to use 12mm hose and push fitting for their cooling system, this is an adaptor that will fit into a 12mm push fit connector (like the ones StillDragon supply) and allow connection to 15mm copper/plastic pipe.
http://www.caravanaccessoryshop.co.uk/p ... -15mm/4516
I needed it as my main condensor has 15mm copper connections for the cooling, so I needed to get from the 15mm output to 12mm for connection to my reflux coil, the advantage of using 12mm hose is you can get needle valves, temp probes and a hole variety of quick disconnect push fittings to make life easier, plus you can bling it up by colour coding your cooling hose
I popped into a local caravan shop and got one for £4.14, dearer than the link above but no postage to worry about.
Just thought I'd share this, if anyone's using or going to use 12mm hose and push fitting for their cooling system, this is an adaptor that will fit into a 12mm push fit connector (like the ones StillDragon supply) and allow connection to 15mm copper/plastic pipe.
http://www.caravanaccessoryshop.co.uk/p ... -15mm/4516
I needed it as my main condensor has 15mm copper connections for the cooling, so I needed to get from the 15mm output to 12mm for connection to my reflux coil, the advantage of using 12mm hose is you can get needle valves, temp probes and a hole variety of quick disconnect push fittings to make life easier, plus you can bling it up by colour coding your cooling hose
I popped into a local caravan shop and got one for £4.14, dearer than the link above but no postage to worry about.