RUM
69 posts
• Page 2 of 5 • 1, 2, 3, 4, 5
Re: RUM
Are you using coffee filters? Most filter papers are quite porous and will allow small particles through. I stuff (compress it good then wet it) cotton wool into the neck of a funnel when I want to filter out small particles. The liquid goes through by capillary action so the result is very clear.
Chuck
Chuck
-

chill - Master Distiller

- Posts: 1660
- Joined: Tue Mar 13, 2012 4:46 am
- Location: We(s)t Coast of Canada
- Stills: Easy Still
Re: RUM
I think that my rum is a little too murky for this technique. Even the coffee filters get choked very quickly.
When I am ready for bottling I will pass it through coffee filters first and than give it a final polish using your method.
Thanks for the input
Brian
When I am ready for bottling I will pass it through coffee filters first and than give it a final polish using your method.
Thanks for the input
Brian
- YHB
- Master Distiller

- Posts: 973
- Joined: Sun Oct 23, 2011 1:55 pm
Re: RUM
I have tasted it, tested it, criticsed it but never drunk it - tonight that changed.
Crushed a tall glassful of ice, buried a slice of fresh lemon in it, trickled a good measure of white rum through it and topped it up with coke.
Life is very very good.
Brian
Crushed a tall glassful of ice, buried a slice of fresh lemon in it, trickled a good measure of white rum through it and topped it up with coke.
Life is very very good.
Brian
- YHB
- Master Distiller

- Posts: 973
- Joined: Sun Oct 23, 2011 1:55 pm
Re: RUM
It's now three months later and any similarity between the Rum I made and the Rum that I have now, is purely accidental.
How the flavours have changed, How it has mellowed - It's now smooth and I am quite proud of it - I want to keep it, I want to share it, I want to drink it. I want to make lots more of it.
When I started this hobby one of my goals that I set myself was not to "Age" anything - but if it tastes like this after thee months what will it be like in a year?
Where are all those threads on barrels?
How the flavours have changed, How it has mellowed - It's now smooth and I am quite proud of it - I want to keep it, I want to share it, I want to drink it. I want to make lots more of it.
When I started this hobby one of my goals that I set myself was not to "Age" anything - but if it tastes like this after thee months what will it be like in a year?
Where are all those threads on barrels?
- YHB
- Master Distiller

- Posts: 973
- Joined: Sun Oct 23, 2011 1:55 pm
Re: RUM
I finally started a rum wash, finally. This started off like a rocket and has been going strong for 24 hours. I was going to try the Still Spirits Distillers Rum yeast; but, I thought I'd go with what I have.
For 20 liters:
1.9 L Fancy Molasses
1.8 kg Pure Cane Sugar
1 T DAP
1/8 t Epsom Salt
1 t Gluco-amylase
1/2 t Boiled yeast component
50 g Bread yeast
Add water to top up to 22 L
Process:
Invert sugar with an equal volume of water for 30 minutes
Add molasses from graduated pitcher to fermenter
Rinse molasses from pitcher using all the hot inverted sugar into fermenter
Rinse any remaining molasses with hot water from kettle
Top off fermenter with cold water, stir to thoroughly mix sugars and allow wash to cool to 95F/35C
Add boiled yeast component, DAP, epsom salt and gluco-amylase
Pitch bread yeast and aerate for 1 minute
Notes:
This should be a 10% wash yielding 20 L of clean wash.
This wash should result in a medium-bodied rum
For 20 liters:
1.9 L Fancy Molasses
1.8 kg Pure Cane Sugar
1 T DAP
1/8 t Epsom Salt
1 t Gluco-amylase
1/2 t Boiled yeast component
50 g Bread yeast
Add water to top up to 22 L
Process:
Invert sugar with an equal volume of water for 30 minutes
Add molasses from graduated pitcher to fermenter
Rinse molasses from pitcher using all the hot inverted sugar into fermenter
Rinse any remaining molasses with hot water from kettle
Top off fermenter with cold water, stir to thoroughly mix sugars and allow wash to cool to 95F/35C
Add boiled yeast component, DAP, epsom salt and gluco-amylase
Pitch bread yeast and aerate for 1 minute
Notes:
This should be a 10% wash yielding 20 L of clean wash.
This wash should result in a medium-bodied rum
-

Keystone - Experienced Distiller

- Posts: 133
- Joined: Sun Apr 03, 2011 11:48 pm
Re: RUM
Sounds good, but I don't understand what the Gluco-amylase is bringing to the party?
-

Capt-Cudellez - Donated to StillSmart

- Posts: 1139
- Joined: Tue Dec 07, 2010 12:22 am
- Location: Scotland
- Stills: SS VM, Stripper, Pot
Re: RUM
Hi Keystone,apart from the glucoamylase your wash is similar to mine other than i use black strap molasses
for 50ltrs i use.
10 ltrs blackstrap
6kg sugar
1tbs Dap
1tsp epsome salts
yeast bomb
200grm bread yeast
alan
for 50ltrs i use.
10 ltrs blackstrap
6kg sugar
1tbs Dap
1tsp epsome salts
yeast bomb
200grm bread yeast
alan
a woman drove me to drink and i didn;t even have the decency to thank her
-

alan - Donated to StillSmart

- Posts: 244
- Joined: Sat Sep 27, 2008 10:22 pm
- Location: lancashire england
- Stills: airstillT500 2in ph
Re: RUM
Fancy grade molasses, by weight, is about 60% fermentable, where fermentable means simple sugars that yeast can easily consume to produce alcohol as a by-product. Some percentage of the weight is complex carbohydrates which can be converted to simple sugars by gluco-amylase or AG.
How much? That, I do not know. Ultimately, I was trying to replicate the SS Distillery Rum Yeast with AG without excessive unknown nutrients by using what I have. I have seen some anecdotal comments that the enzyme helped to increase ABV yield. This is what White Labs and SS claims.
How much? That, I do not know. Ultimately, I was trying to replicate the SS Distillery Rum Yeast with AG without excessive unknown nutrients by using what I have. I have seen some anecdotal comments that the enzyme helped to increase ABV yield. This is what White Labs and SS claims.
-

Keystone - Experienced Distiller

- Posts: 133
- Joined: Sun Apr 03, 2011 11:48 pm
Re: RUM
Lot's of articles/adverts on using enzymes including glucoamylase for squeezing the most methanol (Edit - ethanol ) possible out of molasses for fuel production.
http://indizyme.com/products/brewery-al ... miser.html
http://indizyme.com/products/brewery-al ... miser.html
Last edited by YHB on Sun Nov 25, 2012 6:30 pm, edited 1 time in total.
- YHB
- Master Distiller

- Posts: 973
- Joined: Sun Oct 23, 2011 1:55 pm
Re: RUM
YHB wrote:Lot's of articles/adverts on using enzymes including glucoamylase for squeezing the most methanol possible out of molasses for fuel production.
http://indizyme.com/products/brewery-al ... miser.html
Did you mean ethanol as opposed to methanol?
-

Keystone - Experienced Distiller

- Posts: 133
- Joined: Sun Apr 03, 2011 11:48 pm
69 posts
• Page 2 of 5 • 1, 2, 3, 4, 5
Who is online
Users browsing this forum: No registered users and 1 guest
