Had to stop first t 500 run
6 posts
• Page 1 of 1
Had to stop first t 500 run
Hi all. I did my first run on my t 500 last night and I'm pretty impressed. I ran 3 gallons of 30% stripped wash and pulled about 3 L. It lasted longer than I expected and I had to turn it off. ( I was in my 6th hour). When I turned it off it was still producing at a pretty good rate. When I get home today can I Just turn it on and try to collect more spirits or should I just dump out Whats in the boiler?
-

danmiz - Regular

- Posts: 42
- Joined: Tue Jul 03, 2012 12:33 am
Re: Had to stop first t 500 run
Btw it was 96% from start to finish!
-

danmiz - Regular

- Posts: 42
- Joined: Tue Jul 03, 2012 12:33 am
Re: Had to stop first t 500 run
There shoud be about 1.5 ltr @ 95 abv left in the boiler
-

billmcc - Senior Distiller

- Posts: 358
- Joined: Sat Apr 16, 2011 6:36 pm
Re: Had to stop first t 500 run
Thanks for info. Should I chuck another 50 ml of fores?
-

danmiz - Regular

- Posts: 42
- Joined: Tue Jul 03, 2012 12:33 am
Re: Had to stop first t 500 run
Foreshots are a one time deal, once there gone there gone. No need to make another cut. I sometimes find you need to make an additional small heads cut, but you should start back up where you finished in the run.
If you have a very small amount of alcohol left in the boiler you can have trouble re-equalising the column, but you should be ok based on your numbers.
If you have a very small amount of alcohol left in the boiler you can have trouble re-equalising the column, but you should be ok based on your numbers.
-

Capt-Cudellez - Donated to StillSmart

- Posts: 1139
- Joined: Tue Dec 07, 2010 12:22 am
- Location: Scotland
- Stills: SS VM, Stripper, Pot
Re: Had to stop first t 500 run
Ok got it! thanks again.
-

danmiz - Regular

- Posts: 42
- Joined: Tue Jul 03, 2012 12:33 am
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest