30 litre boiler
Well 33 litres actually.
I just ordered one of these.
The smaller 33 litre version. They come with 1.5" TC ferrules welded on. I ordered the 3kW element and the TC adaptor so I hope the element fits the boiler.
It should do, as I am sure they would have mentioned if it were too long.
I am going to fit a PSV with a gauge to a 1.5" TC blanking plate, and take this overseas as a "steamer". If I just happen to have a take down modular pot still attached to another TC blanking plate well that is pure coincidence.
I did look at alternatives also.
All American pressure canner - absolutely brilliant bit of kit, but expensive.
Presto 23 quart pressure canner, easily adaptable but actually about the same size as this overall. (That 23 quarts must be load capacity and not physical capacity). Again more expensive.
I will have to build a controller which will bump up the price, but even with a home build packed column it would still be less than a T500, and with luck will be a bit more compact as the boiler is 350 mm x 350 mm.
I will modify and finish off my pot still build, and put together a short PC to go with it. Thinking 9 x 10 mm tubes in a 54 mm shell at 270 mm (possibly 300) will do.
I know it is short for a PC but if I can make everything so it fits inside the boiler for transport it would be nice. If necessary I can make a 2 part condenser, as I will build it with TC ferrule ends.
I just ordered one of these.
The smaller 33 litre version. They come with 1.5" TC ferrules welded on. I ordered the 3kW element and the TC adaptor so I hope the element fits the boiler.
It should do, as I am sure they would have mentioned if it were too long.
I am going to fit a PSV with a gauge to a 1.5" TC blanking plate, and take this overseas as a "steamer". If I just happen to have a take down modular pot still attached to another TC blanking plate well that is pure coincidence.
I did look at alternatives also.
All American pressure canner - absolutely brilliant bit of kit, but expensive.
Presto 23 quart pressure canner, easily adaptable but actually about the same size as this overall. (That 23 quarts must be load capacity and not physical capacity). Again more expensive.
I will have to build a controller which will bump up the price, but even with a home build packed column it would still be less than a T500, and with luck will be a bit more compact as the boiler is 350 mm x 350 mm.
I will modify and finish off my pot still build, and put together a short PC to go with it. Thinking 9 x 10 mm tubes in a 54 mm shell at 270 mm (possibly 300) will do.
I know it is short for a PC but if I can make everything so it fits inside the boiler for transport it would be nice. If necessary I can make a 2 part condenser, as I will build it with TC ferrule ends.


