Heater Stat - Thorn Electrim
3 posts
• Page 1 of 1
Heater Stat - Thorn Electrim
by Still Brewing » Wed Nov 04, 2015 7:16 pm
Need a little advice please.
Been searching round the shed and found one of those Thorn Electrim fermenting barrel tubular heaters. I know it works but it has no plug, and as I'm not that clued up on electrics, can somebody tell me what sized fuse should be in the plug.
Its a 75W heater if that helps.
Cheers
Been searching round the shed and found one of those Thorn Electrim fermenting barrel tubular heaters. I know it works but it has no plug, and as I'm not that clued up on electrics, can somebody tell me what sized fuse should be in the plug.
Its a 75W heater if that helps.
Cheers
-
Still Brewing - Experienced Distiller
- Posts: 113
- Joined: Sat May 02, 2015 6:29 pm
Re: Heater Stat - Thorn Electrim
by vino-tinto » Wed Nov 04, 2015 8:51 pm
240v divided by 75w = 0.32 amps, so a 5 amp fuse is ideal.
Last edited by vino-tinto on Wed Nov 04, 2015 10:01 pm, edited 1 time in total.
Always give the hardest job to the laziest person because they will always find the easiest way to do it.
-
vino-tinto - Senior Distiller
- Posts: 449
- Joined: Tue Oct 08, 2013 4:45 am
- Location: East of England
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest