Better late than never, time flies when you're gutting a bathroom

OK, firstly not that i can compare to any other peated malts as this was my first run using one but I have to admit the final product tastes good. Albeit to my taste not very peaty now (a lot of the peatiness come in the last of the hearts and deep into the tails) but i'll start from the beginning. I thought my mashing technique was good but didn't realise there was a problem until way too late with this malt. I reckon it has low a-amylase activity (as you found Robert by adding a-a enzyme and seeing your SG increase). My final SG after mashing, clearing and sparging was 1.08 to 1.1 (around 12% final) which was 93% conversion so i though wey hey winner but it turns out 3% potential alc. of my wort was unfermentables. b-amylase activity is obviously great but next time i mash (as i will buy some more of this grain) i will add a handful or two of grist at the 1hr mark and stir in. I made my own mash tum from a 32L Thermos cool box, a few fixings and a 1m flexihose. Works well but can only be a 1 step mash as such, no prewarming etc like you could do cooking it up or on a braumeister (is that what they're called?) Therefore on the pretense of losing 3deg per hour in temp I can reverse engineer this and add grist/a-a enzyme at this stage to chop up the longer chain starches as a-a activity would be at it's peak at this temp (I mashed starting at 63 - 64 deg). Should work as you saw Robert. My wort also smelt sooty but I could also distinctly smell the reek too which pleased me. Also the wort at all stages of the ferment tasted good - peaty - it's a wine thing to taste test lol! Contrary to you Robert and AT i had a pig fermentin this wort. Took over a week to take off and i'm unsure why. I aerated well, pH was bob on and set my thermostat to 22deg the optimal temp of the yeasties strain but it just stalled?!? I used Fermentis Safale No.5 as per some of @Franks posts, 2 bags to 85L, maybe i needed 3 but should have been ok. Who knows. On the plus side the yeasties once going munched through the sugar with ease, good considering it's a beer yeast and Fermentis offer no info on alc. tolerance of this strain! Took over a month before I was happy to put outside to cold filter on these chilly nights, way longer than i would have liked but I did have a crystal clear wash (I was worried about bacterial infection due to such a long start on the ferment). As you experienced the strip smelt awesome, v peaty and i ran down to 10% as the aromas coming through on the latter stages was where the good stuff was obviously at ! I had 3 25L strips that resulted in 16L at 30% for my spirit run. Dissapointing as was aiming for 25L at my original numbers but the math works for a roughly 9% wash. The spirit run was good, clean between cuts and easy to taste/smell. I have a pot still as per AT's design if i remember correctly, just a few minor differences. I should also note that I've ran my still countless times using sugar washes so i can get a feel for my still and cuts etc before i've attempted to make anything to drink. Was invaluable and I have a book for of notes, run times, %, volumes for time steps, temp etc. On the plus side i have at least 2 years worth of screen wash now haha. The spirit run was good, ran at 750w over about 5 - 6hrs. Started at 86%, my first hearts cut was around 73% (I probably could have used before this but the spirit had a slight zing so i wasn't greedy) and honestly i could have used all of the tails if i could even call them that which i found most surprising. When doing my brandy run the tails smelt and tasted like *%£". I never knew such tastes could exist!!!. I taste test everything and the latter of the run was just earthy, pleasant to taste, no oiliness, cloudiness and certainly no rancidness. I genuinely could have used all of it unless it would have diluted my final % below cask strength - but i did cut deep! Overall the resulting spirit is not as peaty as i expected, smells peatier than it tastes in my opinion - still very good though but my pallet loves reek lol. Most of the peat came through around the 60% mark, was most prominent in the latter of the hearts. I resulted in around 2L at 63% which I aerated for a couple of days and then split into 3 1.5L Kilners. I have these sitting on SD dominoes on my radiator after a quick nuke to set them off (that's an ingenious trick btw)! Have them on french oak no.s 4, 5 and 6. Top of my head that's Radiant Toast, Radiant plus Extreme Vanillin and Traditional Fire Toast. The former 2 smell and awesome (and just keep getting better - it's amazing how the taste profile can change in little over a week), especially the extreme vanillin. The Fire Toast i'm a little unsure about, it smells woody on the nose but not overall in taste, more v smokey possibly bordering on sooty. Think those dominoes will be coming out v soon or it will surpass a pleasant taste..... Overall i'm happy with the malt, would prefer more peat but it is cheap. As mentioned I will change my mash technique next round (which will be v soon). All in all i'm going to enjoy drinking my v own liquor v soon (i'll be honest with myself it's not going to last the month hahaha >:D >:D >:D I have a good tip for those wanting to age in DJ's btw, i'll add this to the tips board. Very clever of me if i do blow my own trumpet lol