StillSmart

As above, also a 'heads up' section for bargain equipment might be good?

That is not a bad idea.
It may be another 6 months before Jimmy pops by and sees it though..
If you wish to get the ball slowly rolling by posting in the General Chat section, I can make it a sticky.
I can't do much more.

At a wild guess, I have the worst internet service of all on this site. It usually surprises me that I am actually online.
The last dish monkey was blown off the chimney about a month ago,he claims that he will be back,with internet speeds to die for.

I am not holding my breath,but do what I can.

Robert.

Thanks Robert

I think this would be an advantage to the forum.....can you make it a sticky ED??

In the light of VT selling his T5...I've come to the conclusion that I could have some bits of kit that I now don't need.

As we progress in this hobby of ours, we do move on up the ladder in the kit scene.

I know I have surplus gear that I need to re-home also. I won't be back in the UK very often but I would use the section.

I would definitely use it as a buyer. I can't help myself when I see a nice new shiny piece of equipment.

O.K. the topic is Stickied.
8 Months later,and I am still on slow band.
It must have been a dream I had that Jimmy came back,and we chatted,and chewed the fat about penumbral harvest moon eclipses.....
My new ring tone is an old Modem dial up noise affair.
A little bit of history,still active for me.

Robert

I have played with my limited powers on this site, and a stickied announcement seems to be the best that I can do.
Is first post on General chat good enough until our man comes along and tidies up the board?
Now use this fecking facility


Robert.

I have about 20kgs of 2.0mm unused copper wire in the garage, if anyone wants a few feet for lining the airstill condenser pipe i can post out in a jiffy for you. If you like it a donation to to this site would be great thanks. The wire is lacquered and will need stripping with some wire wool. I will add a picture in a while.

OK..
I wasn't expecting this to head up every section of the site!
It should certainly do the job until the man comes along and asigns it a new section of it's own.

Robert.

Anyone have any 4" StillDragon bubble plates with the standard bubble caps in that they are willing to swap for 4" plates with ProCaps, I have 2 plates with 3 x ProCaps in each, also have the downcomer extensions.

I want to just have standard bubble cap plates in my setup.

Loving to see this one used, but figure you have more chance of picking six numbers for the lottery this week

Robert.

Lol. I think you might be right there.

Don't let it put you off Mark, the internet is your oyster.......

Just a thought, as we now have this section, do we just sell/ask stilling items only.