bottleing

Bottling and other storage issues

Re: bottleing

Postby Almanac » Sat Sep 08, 2012 9:46 am

Hey! that man thinks like me! :D :D :D Great minds Brian, great minds! :D

That's what I do too! I got an engineering friend of mine to make me a two ring cutter which slices out the silicone by putting it on the sheet and tapping all around with a light hammer to make a nice clean seal which fits the 3lt Kilner Preserve jars I use for flavouring spirits.

I just remembered I loaned that cutter to a brewing acquaintance who has not returned it and now deserves a rollicking! :D :D :D

AM 8)
Almanac
Almanac
Senior Distiller
Senior Distiller
 
Posts: 1847
Joined: Thu Oct 07, 2010 12:09 am

Re: bottleing

Postby Jimmy » Tue Sep 11, 2012 3:17 pm

I tend to store my bottles upright and at 40%, I haven't noticed any off smells or tastes from them. However, if you cap a demijohn with a rubber bung you can get some horrible smells from it, especially at higher strengths. If they're rubber ones on the bottle you mention Stephen, I'd definitely avoid having them in direct contact and if possible replace as the guys have mentioned.
User avatar
Jimmy
Site Owner
Site Owner
 
Posts: 736
Joined: Fri Feb 01, 2008 3:18 pm
Location: People's Republic of West Yorkshire
Stills: T500

Re: bottleing

Postby Capt-Cudellez » Tue Sep 11, 2012 4:50 pm

Just to echo what has been said, if you can avoid it then do. I have stored a 2L preserve jar with 55% whisky for the best part of 12 months (forgot about it) that had a white rubber seal, without any issue.
It was in the cool, I know some of the aussies cant even brew in the summer time due to the heat, so low ambient temps may be a factor in this case.
User avatar
Capt-Cudellez
Donated to StillSmart
Donated to StillSmart
 
Posts: 1139
Joined: Tue Dec 07, 2010 12:22 am
Location: Scotland
Stills: SS VM, Stripper, Pot

Re: bottleing

Postby John51 » Tue Oct 09, 2012 11:14 am

I was just about to start a thread wrt the safety of seals on the storage jars so of course got to read this thread again.

ime, Kilner is the standard for jars, never had a leaky one yet but some of the Ikea ones don't seal properly. There's a brand more expensive than Kilner,something to with Parfait iirc, looks classier than Kilner with a price to match.

To test, half fill with water and invert. The Kilners are such good value though, no point imo to risk a duff seal by buying cheaper.
User avatar
John51
Senior Distiller
Senior Distiller
 
Posts: 434
Joined: Sun Aug 12, 2012 1:15 pm

Re: bottleing

Postby Frank » Tue Oct 23, 2012 7:35 am

I've been using Ikea Slom bottles for well over a year now. I DO try to make sure that the spirit does not come in contact with the lid seal aty all times. When the bottle is empty, I give the seals a soak in boiling water and an 'airdry'.
To the best of my knowledge, the seals are still working well, the spirit does NOT take on noticeable 'flavour' from the seals, however the seals DO have a tendency to take on some of the scent from the bottled spirit (even after cleaning).....
User avatar
Frank
Senior Distiller
Senior Distiller
 
Posts: 284
Joined: Sat Mar 05, 2011 1:04 pm
Location: On my laptop, in my campervan, travelling.
Stills: Potstill,LM Boka

Re: bottleing

Postby Almanac » Tue Oct 23, 2012 8:00 am

I use Kilner jars too and managed to get some silicone and cut out seals for them - much better that the rubber seals as they don't appear affected in any way by the spirit while the rubber ones always got discoloured, smelly and perished.

AM 8)
Almanac
Almanac
Senior Distiller
Senior Distiller
 
Posts: 1847
Joined: Thu Oct 07, 2010 12:09 am

Re: bottleing

Postby John51 » Tue Oct 23, 2012 9:13 pm

I ordered some silicone seals from an ebay link Brian YHB posted but they're smaller. They do work after some messing with them.

Also, my 2 litre Kilner jars seem to have silicone seals already.
User avatar
John51
Senior Distiller
Senior Distiller
 
Posts: 434
Joined: Sun Aug 12, 2012 1:15 pm

Re: bottleing

Postby LeeH » Wed Oct 24, 2012 8:51 am

I buy spirit style screw top bottles and capa from here.

They have a good range.

http://www.colouredbottles.co.uk/
User avatar
LeeH
Newcomer
 
Posts: 6
Joined: Tue Oct 16, 2012 8:56 am
Location: North Lincs
Stills: SS Air Still

Re: bottleing

Postby RickyRasper » Sat Jan 05, 2013 5:04 pm

I hear a lot of people recommending the use of silicone seals. A friend who works in the Bushmills distillery says that the use of silicone in spirits production is completely forbidden by health & safety legislation, this includes the use of rubber and silicon seals on bottles containing alcohol with an abv higher than 19%!!! Be careful people,very careful.
User avatar
RickyRasper
Regular
Regular
 
Posts: 40
Joined: Sat Jan 05, 2013 2:12 pm
Location: County Antrim Coast Northern Ireland
Stills: Copper Alembic Pot

Re: bottleing

Postby YHB » Sat Jan 05, 2013 7:02 pm

I have not heard this before, any chance of some form documentation that will identify the problem. All the charts and literature I have indicates that silicone is suitable for sealing whiskey and ethanol.
YHB
Master Distiller
Master Distiller
 
Posts: 973
Joined: Sun Oct 23, 2011 1:55 pm

Re: bottleing

Postby RickyRasper » Sat Jan 05, 2013 11:10 pm

YHB wrote:I have not heard this before, any chance of some form documentation that will identify the problem. All the charts and literature I have indicates that silicone is suitable for sealing whiskey and ethanol.


I only know that their use is forbidden in distilleries. I would hazard a guess that rubber is not used because it contains sulphur compounds that could taint the spirits. Why do you replace rubber seals for silicon ones? The use of silicon in many products is controversial and I can tell you from personnel experience, having once been a dairy farmer that the use of silicon suction cups and other silicon fittings in Northern Irish Dairy farms are prohibited.
If you Google prohibited materials in commercial distillation for human consumption I'm sure you'll get all the "documentation" you are looking for.
regards Ricky
User avatar
RickyRasper
Regular
Regular
 
Posts: 40
Joined: Sat Jan 05, 2013 2:12 pm
Location: County Antrim Coast Northern Ireland
Stills: Copper Alembic Pot

Previous

Return to Storage

Who is online

Users browsing this forum: No registered users and 1 guest

User Menu

Login Form

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 72 on Mon Oct 15, 2018 1:14 pm

Users browsing this forum: No registered users and 1 guest