Copper Problem

Info specific to the T500

Copper Problem

Postby gaza the instructor » Mon May 09, 2016 8:14 pm

Been given some old proper pennies,
for the young ones these are from when
12 pennies made a shilling. I know cause
mi granny told me !! ;D ;D
Cleaned 'em in coke came up real shiny.
Put about a Shillings worth in the boiler,
did spirit run, cleaned out in the morn.
Oh no, horrid marks on boiler base, cant
budge the marks !!
Any clues guys???
Rather have a full bottle in front of me
than a full frontal lobotomy
User avatar
gaza the instructor
Master Distiller
Master Distiller
 
Posts: 1595
Joined: Fri Mar 11, 2016 10:02 pm
Location: sunny surrey
Stills: s.s&t500 copper

Re: Copper Problem

Postby Easydrinker » Mon May 09, 2016 10:00 pm

Lemon juice? Vinegar? Brillo pad will definitley shift them.
I always thought old pennies were copper, must have been an alloy.
Sorry to hear of your troubles.

Robert.
There is no ONE way.
User avatar
Easydrinker
Donated to StillSmart
Donated to StillSmart
 
Posts: 5206
Joined: Fri Jun 21, 2013 7:09 pm
Location: The hills of lowland Scotland
Stills: Smart & Silly

Re: Copper Problem

Postby Icefever » Tue May 10, 2016 4:30 am

Take 12" of 15mm copper pipe...if you have a pipe cutter ?? or use an hacksaw.. cut the pipe into "ring size" lengths...jobs a good un. ;) this way you'll know your using the real thing.
I tried to be normal once, worst two minutes of my life.

Of all the beautiful things in the world, only man can invent boredom
User avatar
Icefever
Donated to StillSmart
Donated to StillSmart
 
Posts: 2407
Joined: Sun Nov 03, 2013 7:42 am
Location: Kingdom of Mercia

Re: Copper Problem

Postby gaza the instructor » Tue May 10, 2016 5:57 am

ok cheers guys
Rather have a full bottle in front of me
than a full frontal lobotomy
User avatar
gaza the instructor
Master Distiller
Master Distiller
 
Posts: 1595
Joined: Fri Mar 11, 2016 10:02 pm
Location: sunny surrey
Stills: s.s&t500 copper

Re: Copper Problem

Postby Mash » Tue May 10, 2016 6:48 am

I have this occasionally. Never worry. Not established yet what causes it. Maybe cloudy or sweeter washes. I clean it with a ss scrubber.

Once you have run your AS for a while it does take on a golden hue and is difficult to get it immaculate. Truck wash aka Traffic film remover (caustic) is v good. 8)

I don't think these are made from the finest grade of stainless steel.
email still_smart@yahoo.com and stay in touch. More details viewtopic.php?f=1&t=4947
User avatar
Mash
Master Distiller
Master Distiller
 
Posts: 4594
Joined: Wed Jan 21, 2015 4:42 pm
Location: Right here.
Stills: SSSS

Re: Copper Problem

Postby gaza the instructor » Tue May 10, 2016 2:42 pm

Sure your right on there made to a
budget. Still want to try and keep clean.
Its the T500 that suffered from copper thingy?!£
Rather have a full bottle in front of me
than a full frontal lobotomy
User avatar
gaza the instructor
Master Distiller
Master Distiller
 
Posts: 1595
Joined: Fri Mar 11, 2016 10:02 pm
Location: sunny surrey
Stills: s.s&t500 copper

Re: Copper Problem

Postby Mash » Tue May 10, 2016 3:46 pm

Sorry I thought it was your AS - I'm sure the same applies
email still_smart@yahoo.com and stay in touch. More details viewtopic.php?f=1&t=4947
User avatar
Mash
Master Distiller
Master Distiller
 
Posts: 4594
Joined: Wed Jan 21, 2015 4:42 pm
Location: Right here.
Stills: SSSS

Re: Copper Problem

Postby Seagull » Tue May 10, 2016 4:38 pm

My copper dome no longer looks lovely and shiny after its first stripping run. I've cleaned it but it still has the discolouration on the inside.

I read elsewhere that the patina build up is a good thing. Do others worry about discoloration internally on the dome?
User avatar
Seagull
Senior Distiller
Senior Distiller
 
Posts: 465
Joined: Sun Feb 14, 2016 9:37 am

Re: Copper Problem

Postby Mash » Tue May 10, 2016 8:12 pm

Let it naturalise. It is part of the conditioning of the metal. 8)
email still_smart@yahoo.com and stay in touch. More details viewtopic.php?f=1&t=4947
User avatar
Mash
Master Distiller
Master Distiller
 
Posts: 4594
Joined: Wed Jan 21, 2015 4:42 pm
Location: Right here.
Stills: SSSS

Re: Copper Problem

Postby Benoit » Tue May 10, 2016 11:07 pm

Its probably quite strange of me but the steel I will give a wipe over with a green scourer / hot water after use & the copper I tend to just rinse. I only really clean the outside every now & then will a stainless scrubbie & cillit bang, shines up real nice with a bright rosy copper hue but that's purely eye candy. If my still has puked then I will clean the inside with hot, soapy water & a demijohn brush but I mostly just rinse it out after with hot water, especially if I know the next use will be a similar wash. I did give a good clean out after a peated whisky before making cachaça because I'd convinced myself the phenols might be hiding in the pipes, might be my mind but I think my first few runs had a slight metallic taste / smell to them especially in the heads which has gone now
Benoit
User avatar
Benoit
Senior Distiller
Senior Distiller
 
Posts: 418
Joined: Mon May 18, 2015 10:05 am
Location: Middle Earth
Stills: Fusti pot / Thumper

Re: Copper Problem

Postby gaza the instructor » Wed May 11, 2016 5:41 pm

Re Seagull.
Don't know about you but if my dome is
discoloured I would see the doc ;D
On more serious note I have copper dome
etc and copper is a funny metal isn't it.
So say its good for all sorts of things,
but we only want flavour BUt good
flavour so do you clean or not???
If so with what???
Rather have a full bottle in front of me
than a full frontal lobotomy
User avatar
gaza the instructor
Master Distiller
Master Distiller
 
Posts: 1595
Joined: Fri Mar 11, 2016 10:02 pm
Location: sunny surrey
Stills: s.s&t500 copper

Re: Copper Problem

Postby Benoit » Wed May 11, 2016 6:15 pm

How often do the big boys break their stills up & scrub them out, I wonder?
Benoit
User avatar
Benoit
Senior Distiller
Senior Distiller
 
Posts: 418
Joined: Mon May 18, 2015 10:05 am
Location: Middle Earth
Stills: Fusti pot / Thumper

Re: Copper Problem

Postby wormwood » Wed May 11, 2016 6:53 pm

Easydrinker wrote:I always thought old pennies were copper, must have been an alloy.


Pennies were bronze from the mid 1800s up until decimalisation. Mostly copper, but possibly with enough zinc and tin to cause issues. I think ha'pennies were the same (and I'm amazed my auto-complete recognizes "ha'pennies" :) )
User avatar
wormwood
Experienced Distiller
Experienced Distiller
 
Posts: 138
Joined: Mon Feb 13, 2012 6:38 pm
Location: USA
Stills: Air Still

Re: Copper Problem

Postby gaza the instructor » Wed May 11, 2016 8:36 pm

Re Benoit;
After every session, I am paranoid about
infection. Think it comes from brewing
beer !! Use citric acid to clean my
stills is that a good thing ???
Rather have a full bottle in front of me
than a full frontal lobotomy
User avatar
gaza the instructor
Master Distiller
Master Distiller
 
Posts: 1595
Joined: Fri Mar 11, 2016 10:02 pm
Location: sunny surrey
Stills: s.s&t500 copper

Re: Copper Problem

Postby gaza the instructor » Wed May 11, 2016 8:41 pm

Re Woodworm;
Have a good handful of old pennies
dated 67 64 etc used coke to clean.
Really shiny let still cool(late night
to following morning early) brown
stains on still base ???
Rather have a full bottle in front of me
than a full frontal lobotomy
User avatar
gaza the instructor
Master Distiller
Master Distiller
 
Posts: 1595
Joined: Fri Mar 11, 2016 10:02 pm
Location: sunny surrey
Stills: s.s&t500 copper

Next

Return to T500

Who is online

Users browsing this forum: No registered users and 1 guest

User Menu

Login Form

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 72 on Mon Oct 15, 2018 1:14 pm

Users browsing this forum: No registered users and 1 guest