StillSmart

ok guys i got some copper washers from here >> http://www.ebay.co.uk/itm/M3-COPPER-SPR ... 8476894019

now when i opened them i noticed they were small the measure about 6mm overall
diameter,are these too small for me airstill i was gonna open the gap a bit aswell

also i got 50

They will work fine be sure to bend them so they can't lay flat on the base of your still
Cheers

Copper is very soft metal and I'm surprised to see spring washers made from it - never seen them before. Are you sure they're not just copper plated?

Anyway, I use pieces of half inch copper tubing, from local plumbing supplier. I got a meter and cut it into 10mm pieces with a pipe cutter. Cheap and Cheerful

AM