Plastic
11 posts
• Page 1 of 1
Plastic
Hi ,
Great forum and enjoying the read so far ,
My smartstill is doing well but just wonder if the plastic spout that hold the carbon bag is ok to attach , i know some argue the use of plastics etc so i am confused as to why the smart still has this plastic spout ??
Do you guys run it without ?
Cheers
J
Great forum and enjoying the read so far ,
My smartstill is doing well but just wonder if the plastic spout that hold the carbon bag is ok to attach , i know some argue the use of plastics etc so i am confused as to why the smart still has this plastic spout ??
Do you guys run it without ?
Cheers
J
-

Stingray - Newcomer
- Posts: 7
- Joined: Sat Jun 09, 2012 3:47 pm
Re: Plastic
Hi Stingray,
I am fairly new to the process as well. I was instructed to remove the plastic spout, removal the carbon then place the spout back on again. I have run a few batches through my Airstill with no problems. I take the spout off at the end of running each 24ltr batch for cleaning thus far seen no discolouration or detect and odour.
Hoping this is of assistance
Regards,
Bandit
I am fairly new to the process as well. I was instructed to remove the plastic spout, removal the carbon then place the spout back on again. I have run a few batches through my Airstill with no problems. I take the spout off at the end of running each 24ltr batch for cleaning thus far seen no discolouration or detect and odour.
Hoping this is of assistance
Regards,
Bandit
-

SCBandit - Newcomer
- Posts: 2
- Joined: Tue May 29, 2012 8:11 am
Re: Plastic
Accepted wisdom is to remove plastic from any part of the process you can, so many people ditch the filter and collection jug and use glass instead. There are arguments about this all over the internet and it's a touchy subject so you make up your own mind - most distillers will tell you that plastic is the devil though, and spirit is definitely a solvent.
-

Jimmy - Site Owner

- Posts: 736
- Joined: Fri Feb 01, 2008 3:18 pm
- Location: People's Republic of West Yorkshire
- Stills: T500
Re: Plastic
+1 what jimmy said and that carbon bag thingy is about as much use as a chocolate fireguard.
The Airstill is a brilliant little basic pot still and I wouldn't part with mine even though I have moved on to bigger and better things. Having said that, because of the limitations of the Airstill, mainly due to its small size, proper carbon filtering is not just optional, it's a must do!
I know there are people who will tell you they never filter product from the Airstill but take my advice - don't go there! I'll give you one supporting argument for this opinion. Taste the distillate from your Airstill before/without 'proper' carbon filtering and think, if you were in a bar and you were served a drink that tasted and smelled the same - would you pay for it?
If you're answer is 'Yes' then the best of luck to you
AM
The Airstill is a brilliant little basic pot still and I wouldn't part with mine even though I have moved on to bigger and better things. Having said that, because of the limitations of the Airstill, mainly due to its small size, proper carbon filtering is not just optional, it's a must do!

I know there are people who will tell you they never filter product from the Airstill but take my advice - don't go there! I'll give you one supporting argument for this opinion. Taste the distillate from your Airstill before/without 'proper' carbon filtering and think, if you were in a bar and you were served a drink that tasted and smelled the same - would you pay for it?
If you're answer is 'Yes' then the best of luck to you
AM

Almanac
- Almanac
- Senior Distiller

- Posts: 1847
- Joined: Thu Oct 07, 2010 12:09 am
Re: Plastic
Cheers guys ,
I do notice the taste and smell , and especially the last bit has a funky sweet taste to it ,
Is there a reference on the forum for a tried and tested method of carbon filtering the distillate ?
As the carbon tea bag and plastic holder/delivery spout is chewing away at my doubts
I do notice the taste and smell , and especially the last bit has a funky sweet taste to it ,
Is there a reference on the forum for a tried and tested method of carbon filtering the distillate ?
As the carbon tea bag and plastic holder/delivery spout is chewing away at my doubts
-

Stingray - Newcomer
- Posts: 7
- Joined: Sat Jun 09, 2012 3:47 pm
Re: Plastic
Reading through the filtering section now :-)
-

Stingray - Newcomer
- Posts: 7
- Joined: Sat Jun 09, 2012 3:47 pm
Re: Plastic
Most effective, least mess but most expensive - the Essencia Filter system.
Low cost but messy - EZ Filter
AM
Low cost but messy - EZ Filter
AM

Almanac
- Almanac
- Senior Distiller

- Posts: 1847
- Joined: Thu Oct 07, 2010 12:09 am
Re: Plastic
Where in uk could you find a essentia filter , my first thought was ebay but no results , will try amazon etc
-

Stingray - Newcomer
- Posts: 7
- Joined: Sat Jun 09, 2012 3:47 pm
Re: Plastic
Creative Winemaking in Spondon, Derby. Good peoples and they are where I bought mine.
Here's a link to the filter http://www.creativewinemaking.co.uk/spirits-and-liqueurs/carbon-filter-systems/cat_146.html
Give Sam a ring on 07870 830422. Tell him Aidan from Ireland sent you and he'll add 10% on to your bill.
AM
Here's a link to the filter http://www.creativewinemaking.co.uk/spirits-and-liqueurs/carbon-filter-systems/cat_146.html
Give Sam a ring on 07870 830422. Tell him Aidan from Ireland sent you and he'll add 10% on to your bill.
AM

Almanac
- Almanac
- Senior Distiller

- Posts: 1847
- Joined: Thu Oct 07, 2010 12:09 am
Re: Plastic
Lol , cheers mate :-)
Website says out of stock but will give him a call tomorrow
Website says out of stock but will give him a call tomorrow
-

Stingray - Newcomer
- Posts: 7
- Joined: Sat Jun 09, 2012 3:47 pm
Re: Plastic
AT
-

Admiral Toad - Donated to StillSmart

- Posts: 883
- Joined: Sat Oct 29, 2011 2:27 pm
- Location: The far North
- Stills: pothead, BP column
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest