t500 hosepipe mod
Posted: Mon Oct 17, 2011 4:18 pmhi all..
i did this mod to my t500 water control thingy and it works a treat!..
all i did was solder a piece of standard 15mm copper pipe to the supplied adaptor(that fits hardly anything) and viola!...
all i do now is to push the hosepipe onto the end and turn the water on but not too fast or it will blow off!.... i have found that i can control the water perfectly by turning the
t500 water adjuster on to its fullest setting and then turning the hose tap down to a decent trickle but too fast for the t500's recomended 400 ish ml per min, and then adjusting the adjuster until i reach the desired water flow and temp on the t500..
hth
al.
i did this mod to my t500 water control thingy and it works a treat!..
all i did was solder a piece of standard 15mm copper pipe to the supplied adaptor(that fits hardly anything) and viola!...
all i do now is to push the hosepipe onto the end and turn the water on but not too fast or it will blow off!.... i have found that i can control the water perfectly by turning the
t500 water adjuster on to its fullest setting and then turning the hose tap down to a decent trickle but too fast for the t500's recomended 400 ish ml per min, and then adjusting the adjuster until i reach the desired water flow and temp on the t500..
hth
al.
