Page 4 of 4

Turbo still 500

PostPosted: Mon Aug 16, 2010 3:27 am
by BundyRed
Welcome Turps. I also use the turbo 500 and very pleased with it. I only throw the first 100mls and have barely no odour either. I only run mine for about 3.5hrs after heat up and get 3.6lts every time. I\'m sure I could get more, but on tank water and for the extra few mls for me its not worth it. I have to get another pump as the tank water pressure pump cuts in and out casing a 3 deg temp swing. I also run mine at 53-57 deg.

Turbo still 500

PostPosted: Mon Aug 16, 2010 6:08 pm
by MrCat
For all the UK guys.
Emailed Richard at Wineworks this morning and he expects them in \"around October time\".
Can\'t wait :)

Turbo still 500

PostPosted: Tue Aug 17, 2010 12:52 am
by foRUM warrior
dang its been put back a month .... guess its to be expected though :)

Turbo still 500

PostPosted: Sun Aug 22, 2010 2:31 am
by bp
Anyone know if you can use the Turbo 500 as pot still also? I\'d like to buy one but also interested in making whiskey etc (without usign post mix flavourings) so I was wondering if the reflux section can be removed?
Thanks.

Turbo still 500

PostPosted: Sun Aug 22, 2010 12:38 pm
by freelancement
ive noticed there is t500 instructional videos on One Stop Bar Shop\'s site now
http://www.onestopbarshop.com.au/produc ... ts_id=1548
thought i should share, its a easy watch

Turbo still 500

PostPosted: Sun Aug 22, 2010 6:10 pm
by MrCat
Nice vids :)
Seeing the column being loaded with ceramic saddles makes me wonder what would happen if you use rashig rings or even pot scrubbers in place of the saddles.

Turbo still 500

PostPosted: Mon Aug 23, 2010 6:40 am
by freelancement
the ceramic saddles are cuppled, it helps to reflux the alco more effectively apparantly

not sure if the copper saddles are shown in the vids, they are curved in shape aswell
I guess stainless scourer would work depending how compact they were

Turbo still 500

PostPosted: Mon Aug 23, 2010 3:45 pm
by Andy
The copper things I got in my kit were flat, like thick sheet cut into little bits.

Turbo still 500

PostPosted: Mon Aug 23, 2010 7:58 pm
by freelancement
hmmm i do have an earlier model,

mine are still a cut up copper sheet, but seems to have been rolled before it was cut

Turbo still 500

PostPosted: Mon Aug 30, 2010 4:35 am
by turps
G-Day again.

I have now put 3 washes through T500,

1st was : 8 kilo dextrose, + samuel willards original temp tolerant yeast

then cleared with stillspirits turbo clear 2 part pack after 5 days

this produced 3.8L of 95% spirit after discarding first 250ml

this was very clean odourless & sweet to taste

a burn test produced no smoke & nice orange flame (a test an old distiller friend swears by).
2nd was : same as 1st except I used 7 kilo sugar instead of dextrose

this produced 3.5L of 94% spirit after discarding first 200ml

this was clean odourless but not as sweet to taste
3rd was : again the same as first except I used 7 kilo dextrose instead of 8 kilo

this produced 3.7L of 95% spirit after discarding first 200ml

this was very clean odourless & sweet to taste

I could have got another 500ml or so but got tired of waiting to finish & shut it down a bit earlier
P.S 1st batch was 3.8L not 3.9L as stated in my previous post.