wash at 1.0 on hydro
5 posts
• Page 1 of 1
wash at 1.0 on hydro
Well finally got my air still yesterday but my wash is still at 1.00 after 3 weeks ... it started at 1.116 .. I have drawn some wash out mixed in more nutrient and thrown back in tonight ..but after opinions if it is worth distilling tomorrow ?
No nasty smells, etc
many thanks
Iain
ps new toy ..can't wait to try it
No nasty smells, etc
many thanks
Iain
ps new toy ..can't wait to try it

-

Iain - Regular

- Posts: 71
- Joined: Mon Aug 06, 2012 3:56 pm
Re: wash at 1.0 on hydro
Go for it, might be more prone to foaming as its not completely dry, so use the conditioner.
-

Capt-Cudellez - Donated to StillSmart

- Posts: 1139
- Joined: Tue Dec 07, 2010 12:22 am
- Location: Scotland
- Stills: SS VM, Stripper, Pot
Re: wash at 1.0 on hydro
many thanks
will let you know how it goes !
will let you know how it goes !
-

Iain - Regular

- Posts: 71
- Joined: Mon Aug 06, 2012 3:56 pm
Re: wash at 1.0 on hydro
Very best I've ever got with SS turbo is about 990 the VS star does better at 980
Should be fine as the C'ptn says
Should be fine as the C'ptn says

AT
-

Admiral Toad - Donated to StillSmart

- Posts: 883
- Joined: Sat Oct 29, 2011 2:27 pm
- Location: The far North
- Stills: pothead, BP column
Re: wash at 1.0 on hydro
thanks all ... just running first lot through now .. bit whiffy but to be expected 
Nothing a couple of more runs through can't sort out
Popped a smartstill copper mesh into the bottom along with the rings so be interesting to see the colour of that when it has finished !
So another big thanks to you all for a superb and enjoyable hobby along with some great advice !
Iain

Nothing a couple of more runs through can't sort out

Popped a smartstill copper mesh into the bottom along with the rings so be interesting to see the colour of that when it has finished !
So another big thanks to you all for a superb and enjoyable hobby along with some great advice !
Iain
-

Iain - Regular

- Posts: 71
- Joined: Mon Aug 06, 2012 3:56 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 2 guests