Turbo still 500

Info specific to the T500

Turbo still 500

Postby BundyRed » Mon Aug 16, 2010 3:27 am

Welcome Turps. I also use the turbo 500 and very pleased with it. I only throw the first 100mls and have barely no odour either. I only run mine for about 3.5hrs after heat up and get 3.6lts every time. I\'m sure I could get more, but on tank water and for the extra few mls for me its not worth it. I have to get another pump as the tank water pressure pump cuts in and out casing a 3 deg temp swing. I also run mine at 53-57 deg.
User avatar
BundyRed
Regular
Regular
 
Posts: 33
Joined: Tue Apr 27, 2010 8:00 am
Location: Where the Bundy Bear Lives

Turbo still 500

Postby MrCat » Mon Aug 16, 2010 6:08 pm

For all the UK guys.
Emailed Richard at Wineworks this morning and he expects them in \"around October time\".
Can\'t wait :)
User avatar
MrCat
Donated to StillSmart
Donated to StillSmart
 
Posts: 353
Joined: Sun Jul 04, 2010 9:43 pm

Turbo still 500

Postby foRUM warrior » Tue Aug 17, 2010 12:52 am

dang its been put back a month .... guess its to be expected though :)
User avatar
foRUM warrior
Experienced Distiller
Experienced Distiller
 
Posts: 111
Joined: Fri Apr 23, 2010 4:48 am
Location: Out there ;-)

Turbo still 500

Postby bp » Sun Aug 22, 2010 2:31 am

Anyone know if you can use the Turbo 500 as pot still also? I\'d like to buy one but also interested in making whiskey etc (without usign post mix flavourings) so I was wondering if the reflux section can be removed?
Thanks.
User avatar
bp
Newcomer
 
Posts: 1
Joined: Sun Aug 22, 2010 2:28 am

Turbo still 500

Postby freelancement » Sun Aug 22, 2010 12:38 pm

ive noticed there is t500 instructional videos on One Stop Bar Shop\'s site now
http://www.onestopbarshop.com.au/produc ... ts_id=1548
thought i should share, its a easy watch
User avatar
freelancement
Regular
Regular
 
Posts: 51
Joined: Tue Jul 13, 2010 8:42 am
Location: Melbourne, Vic, Australia

Turbo still 500

Postby MrCat » Sun Aug 22, 2010 6:10 pm

Nice vids :)
Seeing the column being loaded with ceramic saddles makes me wonder what would happen if you use rashig rings or even pot scrubbers in place of the saddles.
User avatar
MrCat
Donated to StillSmart
Donated to StillSmart
 
Posts: 353
Joined: Sun Jul 04, 2010 9:43 pm

Turbo still 500

Postby freelancement » Mon Aug 23, 2010 6:40 am

the ceramic saddles are cuppled, it helps to reflux the alco more effectively apparantly

not sure if the copper saddles are shown in the vids, they are curved in shape aswell
I guess stainless scourer would work depending how compact they were
User avatar
freelancement
Regular
Regular
 
Posts: 51
Joined: Tue Jul 13, 2010 8:42 am
Location: Melbourne, Vic, Australia

Turbo still 500

Postby Andy » Mon Aug 23, 2010 3:45 pm

The copper things I got in my kit were flat, like thick sheet cut into little bits.
User avatar
Andy
Senior Distiller
Senior Distiller
 
Posts: 331
Joined: Tue Dec 01, 2009 6:21 am
Location: QLD

Turbo still 500

Postby freelancement » Mon Aug 23, 2010 7:58 pm

hmmm i do have an earlier model,

mine are still a cut up copper sheet, but seems to have been rolled before it was cut
User avatar
freelancement
Regular
Regular
 
Posts: 51
Joined: Tue Jul 13, 2010 8:42 am
Location: Melbourne, Vic, Australia

Turbo still 500

Postby turps » Mon Aug 30, 2010 4:35 am

G-Day again.

I have now put 3 washes through T500,

1st was : 8 kilo dextrose, + samuel willards original temp tolerant yeast

then cleared with stillspirits turbo clear 2 part pack after 5 days

this produced 3.8L of 95% spirit after discarding first 250ml

this was very clean odourless & sweet to taste

a burn test produced no smoke & nice orange flame (a test an old distiller friend swears by).
2nd was : same as 1st except I used 7 kilo sugar instead of dextrose

this produced 3.5L of 94% spirit after discarding first 200ml

this was clean odourless but not as sweet to taste
3rd was : again the same as first except I used 7 kilo dextrose instead of 8 kilo

this produced 3.7L of 95% spirit after discarding first 200ml

this was very clean odourless & sweet to taste

I could have got another 500ml or so but got tired of waiting to finish & shut it down a bit earlier
P.S 1st batch was 3.8L not 3.9L as stated in my previous post.
User avatar
turps
Newcomer
 
Posts: 10
Joined: Sun Aug 15, 2010 2:15 pm
Location: nsw, australia

Previous

Return to T500

Who is online

Users browsing this forum: No registered users and 1 guest

User Menu

Login Form

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 72 on Mon Oct 15, 2018 1:14 pm

Users browsing this forum: No registered users and 1 guest