StillSmart

Posted: **Sun Sep 10, 2017 1:54 pm**

Are you sure? I read it as about the boiler and the foaming issue.

No matter.. sorry if I got off topic.

Posted: **Sun Sep 10, 2017 2:51 pm**

Sorry it's me that's adding the confusing element.

The wash was foaming (a lot) causing the white cloudiness. I could see that when I took the head off for cleaning. I've run it again and it was clear and tasty.

The copper packing issue.
I was thinking that a small amount of packing would cause a small amount of reflux and thereby a) slow down the run and b) keep the flavour........however I can see that maybe I'm on the wrong track and perhaps just need a power controller?

Anyone wanna buy a couple of metres of copper mesh :-)

Posted: **Mon Sep 11, 2017 4:45 am**

Reflux strips flavour.
You need power control.

Robert.

Posted: **Mon Sep 11, 2017 7:21 pm**

H12rpo did you buy a column nut or did you find a alternative?

Posted: **Mon Sep 11, 2017 10:14 pm**

No I'm just swapping over the same original one at the moment

Posted: **Wed Sep 13, 2017 3:59 pm**

Easydrinker wrote:You do not throw anything away from a strip run.
You do need to make cuts on the spirit run, only the hearts are for drinking.

I do not throw anything away from a whisky spirit run,- eventually the fores,(fores and heads are not distinguished in whisky distillation) and feints (Tails) reach equilibrium in the feints receiver.
Any harmful higher alcohols are passed to the fairies, and propanol and other lower alcohols which make up the tails are eventually broken down and converted through many still passes.
Or so I am informed by a new good buddy, who happens to be Technical Engineer for a Malt distillery.

Robert.

Robert can you elaborate please?
I.e. What do you do after the strip......step by step please i.e. How do you cut the fores and particularly the bit about not chucking the fores........how do you keep the 'feints'. Uncovered ? Is this how the methanol goes to the fairies etc

Posted: **Wed Sep 13, 2017 10:08 pm**

All q's should be covered in this old post of mine.
viewtopic.php?f=16&t=3027&p=19792&hilit=robert%27s+malt+whisky#p19792
That is my way.
There are others I am sure.

Robert.

StillSmart

Vino tinto pot head for t500

Re: Vino tinto pot head for t500

Re: Vino tinto pot head for t500

Re: Vino tinto pot head for t500

Re: Vino tinto pot head for t500

Re: Vino tinto pot head for t500

Re: Vino tinto pot head for t500

Re: Vino tinto pot head for t500