Page 2 of 3
Re: Upgrade time ?

Posted:
Mon Apr 09, 2018 9:58 pm
by gaza the instructor
Yep still the original Kale recipe. You really do
need a mains water supply to keep the temp steady.
If not you would be adjusting the flow rate all
the time.
Only other way is a bath or waterbutt maybe with
ice in the water, water is hot from the outlet
and a pump.
I use cold mains water supply with a SS flow reg,
that means no flow change if the loo is flushed etc,
and a power controller I bought of Ebay.
Re: Upgrade time ?

Posted:
Mon Apr 09, 2018 10:05 pm
by ninja_geezer
Robbo12 wrote:It reduces the power output i think the slower let's say the t500 is 2kw if I'm right in saying you run the power controller at say 1400 watts it produces better alcohol I've not got one but I'm looking at getting one
Cheers
Re: Upgrade time ?

Posted:
Mon Apr 09, 2018 10:12 pm
by gaza the instructor
Re: Upgrade time ?

Posted:
Mon Apr 09, 2018 10:53 pm
by Easydrinker
Unless that was posted as a price guide?
It is in OZ.
Over £250, add £80+ postage.
Add import duty and VAT. Something over £400 in total.
Add some questions from HMRC.
If I currently wanted one of these, I would sit and manually enter a dozen bids one after the other, starting at £250 and ending at £370.
Such a bid history would totally freak any competing bidder.
The extras that you do not want?
You will either use or can put back for auction and reduce your costs.
There is some extra value in the package you found.
HTH.
Robert.
Re: Upgrade time ?

Posted:
Tue Apr 10, 2018 6:39 am
by Robbo12
I'd sit tight and watch it what i do with eBay is not to bid on it till the last minute then go in with a bid in the last 30 seconds but have a maximum you wanna pay if you win you can always sell the bits you don't want i see the seller from Liverpool area is that far from you as it's about 45 minutes from me.
Re: Upgrade time ?

Posted:
Tue Apr 10, 2018 8:08 am
by Duffer26
I upgraded to an Alan Manning gin still. All in, about half the price of a T500.
The product at 94% straight off the wash is good enough for me so I don't strip.
With my 17L boiler that's two runs taking 8 hrs in total, I don't collect tails.
Regards Marc.
Re: Upgrade time ?

Posted:
Wed Apr 11, 2018 2:54 pm
by ninja_geezer
Thanks for all the suggestions Ive put a deposit on a new one locally (not a bad price as well ) the ebay one has a couple of bidders on it now .i dont think i would get one from overseas as pointed out re HMRC ,import duty ect ....
anyway chaps what is the overall height of the T500 when setup please .i think ive found a little home for it ..

Re: Upgrade time ?

Posted:
Wed Apr 11, 2018 5:04 pm
by gaza the instructor
Just over 130cm mate
Re: Upgrade time ?

Posted:
Wed Apr 11, 2018 10:24 pm
by ninja_geezer
gaza the instructor wrote:Just over 130cm mate
Many thanks

Re: Upgrade time ?

Posted:
Thu Apr 12, 2018 10:11 am
by Toper
I am always reluctant to question when it comes to Reflux Distilling, knowing so little about the process but the comment,
*The product at 94% straight off the wash is good enough for me so I don't strip*
had me puzzled as a Pot Distiller.
Isn't a run without separation of Fores, Heads and Tails a Strip Run? Or, is there some way with Reflux Distilling whereby these elements of the distillate are automatically separated.
Excuse my questioning but, as a Pot Distiller, if I was to drink the distillate straight from the wash, as described, I would be drinking the Strip.
I must have it wrong somewhere.
Re: Upgrade time ?

Posted:
Thu Apr 12, 2018 11:38 am
by gaza the instructor
To answer your question Toper.
Yes you have to do cuts, Fores are obvious as they are on a pot.
Early Heads the same, but by refluxing you can condense them.
Tails really do come in right at the end.
Example:- A spirit run 25 ltrs @30%
So we caculate approx 8 ltrs from run.
Fores 350ml
Heads 1800ml
Hearts 4500ml
Tails 1200ml
All figures approx on Kale wash 3x25ltrs stripped .
Re: Upgrade time ?

Posted:
Thu Apr 12, 2018 12:04 pm
by Mash
+1 I wasn't sure I had read it right.
IMO yes it still needs cuts.
Re: Upgrade time ?

Posted:
Thu Apr 12, 2018 3:43 pm
by Duffer26
Yes, I make the cuts.
Re: Upgrade time ?

Posted:
Thu Apr 12, 2018 7:42 pm
by ninja_geezer
gaza the instructor wrote:To answer your question Toper.
Yes you have to do cuts, Fores are obvious as they are on a pot.
Early Heads the same, but by refluxing you can condense them.
Tails really do come in right at the end.
Example:- A spirit run 25 ltrs @30%
So we caculate approx 8 ltrs from run.
Fores 350ml
Heads 1800ml
Hearts 4500ml
Tails 1200ml
All figures approx on Kale wash 3x25ltrs stripped .
Gazza sorry for maybe a daft question but you said from 3x25 litres of kale wash stripped ,did you strip using the T500 or a pot head ?
and what was your total volume in the boiler from the 3 stripped washes that gave you your fores heads hearts and tails results.
Re: Upgrade time ?

Posted:
Sat Apr 14, 2018 6:12 pm
by ninja_geezer
I see the T500 on the bay went for £370 .i only paid £10 more for a spanking new one glad i did not bid now ,i know it had other stuff but ive got shit loads of other stuff loll..