StillSmart

Anavrin wrote:Found a place in Oldham selling them cheaper and cheaper postage, I would probably collect from there

http://www.bluestarpackaging.co.uk/60l- ... 2298-p.asp

I use a 60 litre one for double batch ferments, as mentioned no airlock needed just don't screw the lid tight. The down side is its super heavy when full and regular racking canes are not long enough.

Submersible Whale 12v caravan pump on the end on 2m 1/2 inch clear hose. Brilliant. And not expensive.

Look at this on eBay http://www.ebay.co.uk/itm/201681998777

Works on a wall slug or a battery.

Attach to a cane to drive the end about for accurate racking.

So does that sit on the bottom of the fv?

I have attached the pump, hose and the 12v cord to an aluminum rod, with 3 cable ties. This way I can put the pump anywhere I want and slide the pump up and down the rod to regulate depth.

A wash off and spray in alc sterilizes it. Remove 3 cable for a full strip deep clean. Been using it for YEARS. Brilliant.

Terrible picture follows if it helps .......

Thanks Mash now I understand

Mash wrote:I have attached the pump, hose and the 12v cord to an aluminum rod, with 3 cable ties. This way I can put the pump anywhere I want and slide the pump up and down the rod to regulate depth.

A wash off and spray in alc sterilizes it. Remove 3 cable for a full strip deep clean. Been using it for YEARS. Brilliant.

Terrible picture follows if it helps .......

Pump small.jpg

Surely that should be on a copper tube?

Nope. Not at all.

Whats your thinking?

Aluminium reacts with stuff or so I thought...

Aluminium would have to be in a wash for a LONG,LONG time to have any appreciable reaction, No?
Your Ma, and My Ma grew up thinking Aly was the best material ever for saucepans.
Scrub it shiney clean each time and it may indeed hasten "oldtimers" ,but I believe it is considered to be mostly safe.
Hey, what do I know

Robert.

Right I am with you now Gadget.

Robert has nailed it.

I will add copper is reactive in a wash too, so you REALLY don't want that unless you are using it to remedy a hydrogen sulphide issue.

The aluminium rod isn't mandatory. Anything smooth & inert will do. I settled on something skinny to get thought the neck of a 54l carboy. But for fermenters you could equally use a boom handle.

Another way could be to use the inline pump but this does suffer from airlocks due to the gas released.

Mash wrote:Right I am with you now Gadget.

Robert has nailed it.

I will add copper is reactive in a wash too, so you REALLY don't want that unless you are using it to remedy a hydrogen sulphide issue.

The aluminium rod isn't mandatory. Anything smooth & inert will do. I settled on something skinny to get thought the neck of a 54l carboy. But for fermenters you could equally use a boom handle.

Another way could be to use the inline pump but this does suffer from airlocks due to the gas released.

understood

Nice piece of architrave would work......

A musket ball would work

Nah that's lead

A nice piece of Oak dowel?
Get some early influence

Robert.