Saving Some Electric And Time
9 posts
• Page 1 of 1
Saving Some Electric And Time
Don't know if this has been asked before, I did look through the search but hit a blank.
Is there anything wrong with heating the wash over the gas and then transferring it to the Airstill for stripping.
Thought it would save time and energy. If so, whats the maximum temperature I can go up to.
Is there anything wrong with heating the wash over the gas and then transferring it to the Airstill for stripping.
Thought it would save time and energy. If so, whats the maximum temperature I can go up to.
-

Still Brewing - Experienced Distiller

- Posts: 113
- Joined: Sat May 02, 2015 6:29 pm
Re: Saving Some Electric And Time
@ SB: Yes you could. BUT the hotter it gets the more alcohol you will lose before you transfer to the other container. Adding it all up, playing with hot liquid, etc. its probably not worth it.
Mind you - I have no idea what an Airstill is.
Mind you - I have no idea what an Airstill is.
-

RumJohn - Master Distiller

- Posts: 606
- Joined: Thu Dec 20, 2012 2:21 am
- Location: Sanya, China
- Stills: Homegrown
Re: Saving Some Electric And Time
And keep in mind as the alcohol starts to evaporate off that gas is an ignition source.
I'd error on the side of cooler. Less of a worry with wash than low wines I'd expect. Others here have written about doing it.
Chuck
I'd error on the side of cooler. Less of a worry with wash than low wines I'd expect. Others here have written about doing it.Chuck
-

chill - Master Distiller

- Posts: 1660
- Joined: Tue Mar 13, 2012 4:46 am
- Location: We(s)t Coast of Canada
- Stills: Easy Still
Re: Saving Some Electric And Time
I've tried it on a couple of occasions....I only heated the wash to around 45c then poured it into the airstill...but IMHO it's not worth the time & trouble, it didn't seem to cut down on the time...and there was no saving on the elec as we have an elec hob.
I tried to be normal once, worst two minutes of my life.
Of all the beautiful things in the world, only man can invent boredom
Of all the beautiful things in the world, only man can invent boredom
-

Icefever - Donated to StillSmart

- Posts: 2407
- Joined: Sun Nov 03, 2013 7:42 am
- Location: Kingdom of Mercia
Re: Saving Some Electric And Time
+1 not worth the effort.
What is good thought - and seems to save about 30 minutes is a hot swap . If you are doing multiple runs.
Invest in some stout rubber gloves, empty the hot pot are soon as the run has completed. immediately refill and start it up again. A good handful of copper in the bottom will also retain the heat (as well as all the other good stuff it does)
What is good thought - and seems to save about 30 minutes is a hot swap . If you are doing multiple runs.
Invest in some stout rubber gloves, empty the hot pot are soon as the run has completed. immediately refill and start it up again. A good handful of copper in the bottom will also retain the heat (as well as all the other good stuff it does)
email still_smart@yahoo.com and stay in touch. More details viewtopic.php?f=1&t=4947
-

Mash - Master Distiller

- Posts: 4595
- Joined: Wed Jan 21, 2015 4:42 pm
- Location: Right here.
- Stills: SSSS
Re: Saving Some Electric And Time
Thanks for the input chaps.
Advice taken and will now start the hot swap method as described by Mashy.
Cheers
Advice taken and will now start the hot swap method as described by Mashy.
Cheers
-

Still Brewing - Experienced Distiller

- Posts: 113
- Joined: Sat May 02, 2015 6:29 pm
Re: Saving Some Electric And Time
OK,a maybe controversial addition to this thread.
I have a gas hob.
To me heating four litres of wash,before pouring into the air-still/Smart still,made sense.
In the days that that was my only still,and it was small.
Judge your own pre-heat temp,don't worry about loss of alcohol vapour (all part of the "Angels Share", If it wants to disappear sub 50°C,let it go!).
My only caveat,-wear gloves and don't spill or waste your product.
And I would not do this before a spirit run,i.e.with low wines,as earlier mentioned.Only with Strip runs.
Robert
I have a gas hob.
To me heating four litres of wash,before pouring into the air-still/Smart still,made sense.
In the days that that was my only still,and it was small.
Judge your own pre-heat temp,don't worry about loss of alcohol vapour (all part of the "Angels Share", If it wants to disappear sub 50°C,let it go!).
My only caveat,-wear gloves and don't spill or waste your product.
And I would not do this before a spirit run,i.e.with low wines,as earlier mentioned.Only with Strip runs.
Robert
There is no ONE way.
-

Easydrinker - Donated to StillSmart

- Posts: 5208
- Joined: Fri Jun 21, 2013 7:09 pm
- Location: The hills of lowland Scotland
- Stills: Smart & Silly
Re: Saving Some Electric And Time
Good Point EaasyDrinker (ha ha)
Only preheat wash, not low wines to be on the safe side,
Only preheat wash, not low wines to be on the safe side,
- Anavrin
- Master Distiller

- Posts: 1468
- Joined: Fri Apr 04, 2014 12:15 pm
- Location: By the Sea
- Stills: 4” StillDragon Dash
Re: Saving Some Electric And Time
Gertcha!
Nice having a moderate police force doing the does.
Robert.
Nice having a moderate police force doing the does.
Robert.
There is no ONE way.
-

Easydrinker - Donated to StillSmart

- Posts: 5208
- Joined: Fri Jun 21, 2013 7:09 pm
- Location: The hills of lowland Scotland
- Stills: Smart & Silly
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
