Might "Splash the Cash"

[Icefever]

It's a good idea John, I made a short length of 2" Copper pipe...a tri clamp each end then you can fit whatever you need.

[Spirits4BB]

Got a few idea's in my head but what's suprised me is how much it is to buy one brand new 50L keg.......
Crusader won't sell direct less than 25, you have to go through Brew UK.

S4BB

[Icefever]

Take a look Here John...you may already know of them....don't know the cost tho.

[Anavrin]

That's where I got mine from, about £70 cash if I remember correctly.

The reconditioned ones aren't much cheaper and they looked quite battered to me so I went for a shiney new one.

[Mash]

oooooooooooo thanks for the link.

[Spirits4BB]

Splashing..........££££££
Been in contact with this place in China that will sell direct to non retailer...
Wenzhou YAYI Light Industrial Machinery Co.,Ltd

8 gallon milk can $94
2 3" dash columns $65 each
2 3"~2" reducers $10.60 each
plus a few tri clamps and a temp gauge...

Will get my mate that welds copper to sort me out with a cheeky little liebig condenser to pop on't top.

S4BB

[Mash]

Thats looks like a good price. Quality?

[Spirits4BB]

Thats looks like a good price. Quality?

Hoping it's good, will post when they arrive.... (IF).
Stinger is delivery.... $126.00, but then again tbf it's nearly 5000 miles away..

communication emails were very good, the lady in sales was very good..

>>>CLICKY<<<

[Myles]

Dont forget to add transport and then VAT onto the full price. It rapidly gets expensive.

I bought my kegs from kammac.com.

You can now get 33 and 50 litre "fermenters" from brewbuilder that come with two fitted triclamp ferrules.

Mine has been delivered but is still in the box for another few weeks.

Milk cans and fustis are alternatives but kegs are a lot stronger. They are pressure rated after all.

[Myles]

I recently brought in 30 clamps.
Price 253
Shipping 161
Vat at 20%
TOTAL ABOUT 490 for 253 in parts.

[Spirits4BB]

Still upgrade put on hold until I fit new kitchen....
Like mentioned before by Myles, once you add VAT, import duty, delivery and the robbing bastards at my bank wanting a percentage for transfer costs it's made a good price expensive.
Will wait until kitchen is done and see if anything is left from the pot...

S4BB

[Sunshine]

May I add something as someone who has imported one or two things from China before

Buying some small stuff like clamps or so is easy. You mostly get what you order.

But a whole setup, even a milkcan with parts can be really a pita. It should be clear, that the chance of grabbing a piece of shit is here really high. We have had a hard time to find a good source for milkcans and mine do cost far more when I bulk buy them before tax and customs. So there is a reason for everything and I am really not the person who spends money easily.

The same goes for simple parts or whatever. Cheap in China means really cheap.

I sit here on a pile of things, that are unsellable or simply bad craftmanship or plain ugly and useless. All pieces be bought for trial. Given what we spend on sourcing and quality control I think our milkcans are not expensive at all. The best thing: someone else had to quarrel with the factories, someone else did the import duty and you get what you see in most times in less than a week from us, with support!

[Sunshine]

forgot to say,

most of the times we ship without packing errors, too - most of the times

>:D

[Spirits4BB]

So when the time is ready to start thing about a milk can again is there any discount codes for forum members??

This was the place I was going to buy from.
http://www.wenzhouyangyi.com/
SS4BB

[Sunshine]

We don't buy there.

The milkcans are discounted at the moment.

They come without shipping charge and any more custom duties.

We have a better lid now, that is stronger for heavier columns. I am very pleased with the quality.