A few questions about the EZ filter system
4 posts
• Page 1 of 1
A few questions about the EZ filter system
Hello guys,
yesterday I used the EZ system for the first time. I drove my vodka 3 times through the cartridge and did not find the result fantastic, the percentage was 38 - 40%. Maybe the fluid went on too fast? Or is there a certain percentage that anyone can recommend to me?
I have taken 2 smell samples. One was filtered 3 times with the EZ cartridge. The other too, but I have filtered that sample again with loose grains of activated carbon. After 2 hours there was already a clear odor difference. What can be the problem with this?
Now I want to reuse my cartridge, I already read that it is possible, it is currently in hot water, after which he enters the oven at 110 ° C (if dry, I suppose). Is this correct?
Sam
yesterday I used the EZ system for the first time. I drove my vodka 3 times through the cartridge and did not find the result fantastic, the percentage was 38 - 40%. Maybe the fluid went on too fast? Or is there a certain percentage that anyone can recommend to me?
I have taken 2 smell samples. One was filtered 3 times with the EZ cartridge. The other too, but I have filtered that sample again with loose grains of activated carbon. After 2 hours there was already a clear odor difference. What can be the problem with this?
Now I want to reuse my cartridge, I already read that it is possible, it is currently in hot water, after which he enters the oven at 110 ° C (if dry, I suppose). Is this correct?
Sam
-

Dynamic - Regular

- Posts: 53
- Joined: Thu Apr 14, 2016 1:53 pm
- Location: Belgium
- Stills: AirStill, T500
Re: A few questions about the EZ filter system
Sam,
I have recycled minea few times. 110c is about right yes.
I have recycled minea few times. 110c is about right yes.
email still_smart@yahoo.com and stay in touch. More details viewtopic.php?f=1&t=4947
-

Mash - Master Distiller

- Posts: 4595
- Joined: Wed Jan 21, 2015 4:42 pm
- Location: Right here.
- Stills: SSSS
Re: A few questions about the EZ filter system
Tell me that you are not putting the 'plastic' cartridge in the oven at 110°C.
Surely the carbon needs emptying out first?
What do I know,I don't know this system.
Robert.
Surely the carbon needs emptying out first?
What do I know,I don't know this system.
Robert.
There is no ONE way.
-

Easydrinker - Donated to StillSmart

- Posts: 5208
- Joined: Fri Jun 21, 2013 7:09 pm
- Location: The hills of lowland Scotland
- Stills: Smart & Silly
Re: A few questions about the EZ filter system
The carbon is in a tubular block. Looks like 6 inches of pipe lagging.
email still_smart@yahoo.com and stay in touch. More details viewtopic.php?f=1&t=4947
-

Mash - Master Distiller

- Posts: 4595
- Joined: Wed Jan 21, 2015 4:42 pm
- Location: Right here.
- Stills: SSSS
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest