re-distilling after cuts

The distillation process itself

re-distilling after cuts

Postby Curmudgeon » Sun Nov 27, 2016 7:38 pm

Something another member mentioned has me pondering.

Distillation does not create anything.

Most of us double distill and make cuts after the second distillation.

What (if any) are the advantages of distilling again after cuts have been made?

(this primarily applies to a pot still without bubblers/thumper etc, I assume?)
User avatar
Curmudgeon
Master Distiller
Master Distiller
 
Posts: 521
Joined: Tue Jul 26, 2016 10:23 pm
Stills: pot head

Re: re-distilling after cuts

Postby Anavrin » Sun Nov 27, 2016 10:25 pm

If you screw your cuts up you could redistil again, also I guess if you wanted to increase the ABV or wasn't happy with the cleaness of the hearts cut from a pot still you could also run it again.
Image
Anavrin
Master Distiller
Master Distiller
 
Posts: 1468
Joined: Fri Apr 04, 2014 12:15 pm
Location: By the Sea
Stills: 4” StillDragon Dash

Re: re-distilling after cuts

Postby Easydrinker » Sun Nov 27, 2016 11:47 pm

IMHO, if you make good cuts after a second distillation, you will gain nothing from a further distillation, if chasing a neutral spirit.
I think Anavrin said the same thing using different words. :D

Robert.
There is no ONE way.
User avatar
Easydrinker
Donated to StillSmart
Donated to StillSmart
 
Posts: 5206
Joined: Fri Jun 21, 2013 7:09 pm
Location: The hills of lowland Scotland
Stills: Smart & Silly

Re: re-distilling after cuts

Postby Curmudgeon » Tue Nov 29, 2016 3:13 am

Thanks. This concurs with my own thoughts. Just wanted to check I wasn't missing anything.
User avatar
Curmudgeon
Master Distiller
Master Distiller
 
Posts: 521
Joined: Tue Jul 26, 2016 10:23 pm
Stills: pot head

Re: re-distilling after cuts

Postby Anavrin » Wed Nov 30, 2016 7:57 am

I once had a cunning plan that I would make more neutral than I needed, and after each new batch, keep all my leftover good drinking Neutral from my last batch and save it up in a cornie keg, then once it was full I was going to run it though my reflux still again, make cuts again and filter it again, to make a super pure premium version.

Unfortunately such a surplus has never existed, maybe one day.
Image
Anavrin
Master Distiller
Master Distiller
 
Posts: 1468
Joined: Fri Apr 04, 2014 12:15 pm
Location: By the Sea
Stills: 4” StillDragon Dash

Re: re-distilling after cuts

Postby Easydrinker » Thu Dec 01, 2016 9:34 pm

You cannae improve upon perfection laddie! :D

Robert.
There is no ONE way.
User avatar
Easydrinker
Donated to StillSmart
Donated to StillSmart
 
Posts: 5206
Joined: Fri Jun 21, 2013 7:09 pm
Location: The hills of lowland Scotland
Stills: Smart & Silly

Re: re-distilling after cuts

Postby Curmudgeon » Fri Dec 02, 2016 12:06 am

I kinda found an odd answer to this after I posted.

Navy rum used to be made in wooden stills (really!) and bacardi is oaked after distillation then filtered at least, so there's a lot of room for re-pot distilling rums later in their development.
User avatar
Curmudgeon
Master Distiller
Master Distiller
 
Posts: 521
Joined: Tue Jul 26, 2016 10:23 pm
Stills: pot head

Re: re-distilling after cuts

Postby Easydrinker » Fri Dec 02, 2016 10:54 pm

Not so sure on the last 14 words here, not disputing the comments before them.

Robert.
There is no ONE way.
User avatar
Easydrinker
Donated to StillSmart
Donated to StillSmart
 
Posts: 5206
Joined: Fri Jun 21, 2013 7:09 pm
Location: The hills of lowland Scotland
Stills: Smart & Silly

Re: re-distilling after cuts

Postby Curmudgeon » Sun Dec 04, 2016 1:22 am

I really don't know.

Navy rum was 57%+? and produced in wooden stills?

Bacardi is a rum that is matured and then filtered back to clear/white (and most of us can replicate to a degree without long aging)
User avatar
Curmudgeon
Master Distiller
Master Distiller
 
Posts: 521
Joined: Tue Jul 26, 2016 10:23 pm
Stills: pot head

Re: re-distilling after cuts

Postby Easydrinker » Sun Dec 04, 2016 2:20 am

It was your comment about re-pot distilling is where I was coming from.
Not disputing what came before. :)

Robert.
There is no ONE way.
User avatar
Easydrinker
Donated to StillSmart
Donated to StillSmart
 
Posts: 5206
Joined: Fri Jun 21, 2013 7:09 pm
Location: The hills of lowland Scotland
Stills: Smart & Silly

Re: re-distilling after cuts

Postby Curmudgeon » Sun Dec 04, 2016 3:14 am

I started the topic full of cynical scepticism, but am now thinking about it as a layer of blending, especially after microwave oven type acceleration of traditional processes.
User avatar
Curmudgeon
Master Distiller
Master Distiller
 
Posts: 521
Joined: Tue Jul 26, 2016 10:23 pm
Stills: pot head

Re: re-distilling after cuts

Postby Easydrinker » Mon Dec 05, 2016 1:07 am

?

Robert.
There is no ONE way.
User avatar
Easydrinker
Donated to StillSmart
Donated to StillSmart
 
Posts: 5206
Joined: Fri Jun 21, 2013 7:09 pm
Location: The hills of lowland Scotland
Stills: Smart & Silly


Return to Distillation

Who is online

Users browsing this forum: No registered users and 1 guest

User Menu

Login Form

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 72 on Mon Oct 15, 2018 1:14 pm

Users browsing this forum: No registered users and 1 guest