Is the SD controller DIY kit any good?

[vino-tinto]

Sorry if I'm speaking out of turn, but why spend that amount of money unessesarily? My set up cost me about £20 all in, and is doing the same job as (I think) you want yours to do.
In answer to the question of ventilation in my Jacobs box. When I'm running it, I leave the lid off, so that's one enormous hole for the heat to escape from!

Didn't you realise Insp Gadget is loaded EDIT: Joke

[Dave]

Well, in that case,......say no more!

[packapoo]

Sorry if I'm speaking out of turn, but why spend that amount of money unessesarily? My set up cost me about £20 all in, and is doing the same job as (I think) you want yours to do.
In answer to the question of ventilation in my Jacobs box. When I'm running it, I leave the lid off, so that's one enormous hole for the heat to escape from!

Didn't you realise Insp Gadget is loaded

Maybe he is.
What's the relevance?
I'm starting to see a light. And it's not one I particularly wish to see.......

[Mash]

In answer to the question of ventilation in my Jacobs box. When I'm running it, I leave the lid off, so that's one enormous hole for the heat to escape from!

Wup Wup. I knew that you had a plan!

[inspector gadget]

Sorry if I'm speaking out of turn, but why spend that amount of money unessesarily? My set up cost me about £20 all in, and is doing the same job as (I think) you want yours to do.
In answer to the question of ventilation in my Jacobs box. When I'm running it, I leave the lid off, so that's one enormous hole for the heat to escape from!

Didn't you realise Insp Gadget is loaded

Maybe he is.
What's the relevance?
I'm starting to see a light. And it's not one I particularly wish to see.......

Have no fear Packapoo I have long stopped worrying about things like that, I hope Ian's comment was not taken out of context, sometimes things said in jest get taken the wrong way. We all have different ideas and ways of doing things, I value everyone's input to my posts and my replies to other posts and hopefully learn a great deal in the process.

Are you familiar with the products from Copperhead distilling?

Gadget

[Myles]

If it is for elements less than 3kW I use the ZVS 16DV but build it into a box with a fan. I haven't tried any of the temperature controlled options because so far I have not been aiming at a specific temperature, I have been more interested in running at a specific power input.

I am sure the AVR is fine but previously I used the PSR25 or PSR40 modules for the same job.

The ZVT's are good with a control stability quoted at 1% so if you need precise temperature control then they will do very nicely indeed. Zero volt switching so no problems with mains or RF interference.

[inspector gadget]

If it is for elements less than 3kW I use the ZVS 16DV but build it into a box with a fan. I haven't tried any of the temperature controlled options because so far I have not been aiming at a specific temperature, I have been more interested in running at a specific power input.

I am sure the AVR is fine but previously I used the PSR25 or PSR40 modules for the same job.

The ZVT's are good with a control stability quoted at 1% so if you need precise temperature control then they will do very nicely indeed. Zero volt switching so no problems with mains or RF interference.

Thanks Myles, I was thinking about temperature control over power at the time and a few posts went through discussing that point so my mind started clanking away which is sometimes a bad move still working on it...

gadget

[Dave]

If I've offended anyone, I apologise profusely!

[inspector gadget]

If I've offended anyone, I apologise profusely!

Not me Dave, Keep doing your thing mate, stay well and keep safe.

[Easydrinker]

Maybe it is me, but with the choice of text colours, this make less sense than a three word story
I know that some of the posters in this topic have some great experience of better power controllers than the one that I am happy to use.
If one of them would like to steer this back on track, that would be good, as I feel it has fragmented into a total mess, and I don't even feel intoxicated!

Robert.

[packapoo]

[que]



Are you familiar with the products from Copperhead distilling?

Gadget[/quote]

I'm aware of them only, have no personal although have been watching them for some years....
They keep turning over so there has to be a heap of them out and about.

Mr Four Square who posts here and was particularly active on the Cachaca thread has quite some knowledge of them - all good I believe.