Chrimbo is coming....

A place for general discussion
Forum rules
Be Nice. NO POLITICS
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Chrimbo is coming....

Post by Icefever »

.....so is DHL on Monday with my new boiler.. ;) .strange...just as I have 2x 23-litre washes that have finished...


Ice.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
gaza the instructor
Valued Member / Donated to SS
Posts: 3464
Joined: Thu Feb 21, 2019 4:45 pm

Re: Chrimbo is coming....

Post by gaza the instructor »

Go sit at the naughty step Ice and wash your mouth out with soap.
You are guilty of using the "C" word in public to early!!!!!
Mirror-signal-manoeuvre.
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

gaza the instructor wrote: Sat Sep 25, 2021 8:21 am Go sit at the naughty step Ice and wash your mouth out with soap.
You are guilty of using the "C" word in public to early!!!!!
To be honest Gaza...DILLIGAF.... :lol: :lol: :lol: :lol: I'll sit on the naughty step as long as I get to play with my new bit of kit???


Ice.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
Moss
Admin & IT Bod
Posts: 1915
Joined: Sat Feb 16, 2019 6:00 pm
Location: Up North
Contact:

Re: Chrimbo is coming....

Post by Moss »

@easydrinker, can you do something about the laungage? The C word has no place here
Have you tried turning it off and back on again?


Vir prudens non contra ventum mingit.

If it’s broken, it might be my fault, is my responsibility and there is even a slight chance I can fix it 😳
User avatar
gaza the instructor
Valued Member / Donated to SS
Posts: 3464
Joined: Thu Feb 21, 2019 4:45 pm

Re: Chrimbo is coming....

Post by gaza the instructor »

Good shot Moss !
Mirror-signal-manoeuvre.
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

Ohhh ganging up on me now.... :o I don't care my shoulders are broad enough....crimbo is coming you can't stop it.... :lol: :lol: :lol: :lol:

Ice.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
Easydrinker
Valued Member / Donated to SS
Posts: 6703
Joined: Sun Feb 17, 2019 8:15 am
Location: The Hills of Lowland Scotland

Re: Chrimbo is coming....

Post by Easydrinker »

These weird abbreviations all sail over my head.
I cannae help here, :lol:

Robert.
There is no ONE way.
"Everyone's happy. Everyone's smiling. No-One here is sad anymore" :D
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

Easydrinker wrote: Sat Sep 25, 2021 10:47 pm These weird abbreviations all sail over my head.
I cannae help here, :lol:

Robert.
It's rude....those of a delicate nature don't look ;)

https://www.youtube.com/watch?v=7a6EOyaMdqY


Ice.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
Mash
Admin/Donated to SS
Posts: 8396
Joined: Wed Feb 20, 2019 7:25 pm
Location: In front of PC.

Re: Chrimbo is coming....

Post by Mash »

I do like a bit of Kevin.
But I thought we were talking about the c word.
Disclaimer above applies ...

https://youtu.be/m03ha1oLdPw
To Gin-finity and beyond !
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

Mash wrote: Sun Sep 26, 2021 8:38 am I do like a bit of Kevin.
But I thought we were talking about the c word.
Disclaimer above applies ...

https://youtu.be/m03ha1oLdPw
I took it that ED was on about DILLIGAF???

Ice.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

Back to the OP....When I ordered the boiler 4 weeks back, I asked for a 2" tri-clamp for the element fitting instead of the screw type, so I needed to source a 3kw element tri-clamp.

Now I'm always a bit iffy about buying from China, you do hear & read about stuff going missing but I found this element on the Ailexpress site...
IMG_20210926_123207034.jpg
It arrived within 6 days, and I must admit it does look like the dogs doodars.. ;) well made, I went for the whole set gasket, spare ferrule, clamp & terminal cover, all for 19 quid.
IMG_20210926_123310114.jpg
Ice.
You do not have the required permissions to view the files attached to this post.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
Easydrinker
Valued Member / Donated to SS
Posts: 6703
Joined: Sun Feb 17, 2019 8:15 am
Location: The Hills of Lowland Scotland

Re: Chrimbo is coming....

Post by Easydrinker »

i hope your new kit does it's job Ice.
it seems to be a very fair price.
And thanks for the two links Ice and Mash.
Made me smile and have to be shared.

Robert.
There is no ONE way.
"Everyone's happy. Everyone's smiling. No-One here is sad anymore" :D
User avatar
phantom
Moderator/Donated to SS
Posts: 1619
Joined: Mon Mar 04, 2019 8:40 pm
Location: Coastal bit (down here).......

Re: Chrimbo is coming....

Post by phantom »

Nice bit of kit ,😁👍
"What the large print giveth, the small print taketh away." Tom Waites
User avatar
Mash
Admin/Donated to SS
Posts: 8396
Joined: Wed Feb 20, 2019 7:25 pm
Location: In front of PC.

Re: Chrimbo is coming....

Post by Mash »

Yeah. Well one Ice. That's going to be a good thing when it's fully built.
To Gin-finity and beyond !
User avatar
gaza the instructor
Valued Member / Donated to SS
Posts: 3464
Joined: Thu Feb 21, 2019 4:45 pm

Re: Chrimbo is coming....

Post by gaza the instructor »

Well done mate.
Mirror-signal-manoeuvre.
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

New kit to try on Thur.... 8-) tap & element fitted...

IMG_20210928_142952903.jpg
Ice.
You do not have the required permissions to view the files attached to this post.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
Jennysgin
Admin/Donated to SS
Posts: 1187
Joined: Wed May 08, 2019 11:45 pm
Location: Scotland

Re: Chrimbo is coming....

Post by Jennysgin »

Ooh, shiny! :D
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

Jennysgin wrote: Tue Sep 28, 2021 8:37 pm Ooh, shiny! :D
I know.... ;) I'm now wondering if Santa will bring me a new column (glass) :lol:

Ice.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
Mash
Admin/Donated to SS
Posts: 8396
Joined: Wed Feb 20, 2019 7:25 pm
Location: In front of PC.

Re: Chrimbo is coming....

Post by Mash »

That is a proper thing, I do like stainless to be thicker that my bean tins.

Really nice. Chunky.
To Gin-finity and beyond !
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

Mash wrote: Wed Sep 29, 2021 8:43 am That is a proper thing, I do like stainless to be thicker that my bean tins.

Really nice. Chunky.
The lid & bottom are both 3mm SS, the side is 1mm. The boiler can also be used on an induction hob if needed, false bottom if you want to mash beer, the company make both brewing & stilling equipment, along with cheese-making & smoking.

I'm just having a cuppa and going to wire up the element and make sure the boiler is clean, fill her with yesterdays strip, set up the column with a section of SPP, then all I have to do is is tomorrow morning switch on for the virgin run.
IMG_20210929_133028160.jpg

Ice.
You do not have the required permissions to view the files attached to this post.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
gaza the instructor
Valued Member / Donated to SS
Posts: 3464
Joined: Thu Feb 21, 2019 4:45 pm

Re: Chrimbo is coming....

Post by gaza the instructor »

Thats it Ice well done, you have got Mash so excited now talking about
thick shiny stainless that I can see steam pouring out of all facial
orifices.
Mirror-signal-manoeuvre.
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

gaza the instructor wrote: Thu Sep 30, 2021 9:25 am Thats it Ice well done, you have got Mash so excited now talking about
thick shiny stainless that I can see steam pouring out of all facial
orifices.
:lol: Mash will be ok I hope?....

I'm sat here in the garage, just cut the deflag back a smidgin,....and it's just run away with me from a second.....got ya. It started with a fast drip, don't want that as you guys know....so opened the valve a little and that's got it to a drip drip, just what I want.

Just checked with the hydro...93.5 maybe 94....that'll do me, Tommy...

Ice.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
gaza the instructor
Valued Member / Donated to SS
Posts: 3464
Joined: Thu Feb 21, 2019 4:45 pm

Re: Chrimbo is coming....

Post by gaza the instructor »

Ice that is more than adequate mate, 94% means you have full
control buddy, so situation normal. :D
BTW Mash ok?? Well he wasn't before! Or as the old joke goes,
"will I be able to play the piano after? Because I couldn't before".
Mirror-signal-manoeuvre.
User avatar
Icefever
Admin/Donated to SS
Posts: 1597
Joined: Thu Feb 21, 2019 6:37 am
Location: West Mercia

Re: Chrimbo is coming....

Post by Icefever »

I was happy with the run yesterday, having 3kw to play with, was a big difference from the 2kw in the T5. The bubble ball filled and sat like that until near the end.
IMG_20210930_093016041.jpg
In this photo, you can see the start of full reflux...
IMG_20210930_092700727.jpg


Ice.
You do not have the required permissions to view the files attached to this post.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-Benjamin Franklin
User avatar
Mash
Admin/Donated to SS
Posts: 8396
Joined: Wed Feb 20, 2019 7:25 pm
Location: In front of PC.

Re: Chrimbo is coming....

Post by Mash »

Aaaaaaaaarr. Ooooooo
To Gin-finity and beyond !
Post Reply