My first strip run today on alembic pot still

A place for general discussion

My first strip run today on alembic pot still

Postby guest5234 » Wed Nov 02, 2016 12:01 pm

Its started to come out at 70%, how do I do I get the recommended 40% turn the water up?
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: My first strip run today on alembic pot still

Postby vino-tinto » Wed Nov 02, 2016 12:22 pm

When doing a strip run you take all the spirit until it comes off @ 20%.
Always give the hardest job to the laziest person because they will always find the easiest way to do it.
User avatar
vino-tinto
Senior Distiller
Senior Distiller
 
Posts: 449
Joined: Tue Oct 08, 2013 4:45 am
Location: East of England

Re: My first strip run today on alembic pot still

Postby guest5234 » Wed Nov 02, 2016 12:31 pm

thanks vino, its now at 50% but the spirit is coming out warm so will read higher.
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: My first strip run today on alembic pot still

Postby Curmudgeon » Thu Nov 03, 2016 2:04 am

Run it as an experiment. Note what goes in and comes out, adjust water flow or whatever you can. Don't drink the first or last. Sip the middle or dip finger and taste. Leave it a day to breathe. Water to 30% and run it again if it's vile.
User avatar
Curmudgeon
Master Distiller
Master Distiller
 
Posts: 521
Joined: Tue Jul 26, 2016 10:23 pm
Stills: pot head

Re: My first strip run today on alembic pot still

Postby guest5234 » Thu Nov 03, 2016 9:00 am

Its not vile it tastes quite good, got just over a gallon at 55%, stopped when at 20% it was starting to taste ropey..
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: My first strip run today on alembic pot still

Postby gaza the instructor » Thu Nov 03, 2016 9:37 am

That's the taste of tails mate .
Not nice.
Rather have a full bottle in front of me
than a full frontal lobotomy
User avatar
gaza the instructor
Master Distiller
Master Distiller
 
Posts: 1595
Joined: Fri Mar 11, 2016 10:02 pm
Location: sunny surrey
Stills: s.s&t500 copper

Re: My first strip run today on alembic pot still

Postby Easydrinker » Thu Nov 03, 2016 10:15 pm

If that was a strip, then I can promise that it will taste better after a dilute to around 30% and a spirit run.
Make cuts,save the heads and tails for another day.
Just sayin'

Robert.
There is no ONE way.
User avatar
Easydrinker
Donated to StillSmart
Donated to StillSmart
 
Posts: 5208
Joined: Fri Jun 21, 2013 7:09 pm
Location: The hills of lowland Scotland
Stills: Smart & Silly

Re: My first strip run today on alembic pot still

Postby guest5234 » Thu Nov 03, 2016 11:51 pm

cheers, will save the hearts for my gin
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: My first strip run today on alembic pot still

Postby gaza the instructor » Fri Nov 04, 2016 7:10 am

good man :)
Rather have a full bottle in front of me
than a full frontal lobotomy
User avatar
gaza the instructor
Master Distiller
Master Distiller
 
Posts: 1595
Joined: Fri Mar 11, 2016 10:02 pm
Location: sunny surrey
Stills: s.s&t500 copper

Re: My first strip run today on alembic pot still

Postby guest5234 » Fri Nov 04, 2016 11:41 am

looked for a recipe for soaking the botanicals in 2 strips to go through the alembic pot still. Just need the quantity for 2 x 5 gallon strips. What amounts to put in for thr gin run and what botanicals.
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: My first strip run today on alembic pot still

Postby Curmudgeon » Sat Nov 05, 2016 1:15 am

User avatar
Curmudgeon
Master Distiller
Master Distiller
 
Posts: 521
Joined: Tue Jul 26, 2016 10:23 pm
Stills: pot head

Re: My first strip run today on alembic pot still

Postby Easydrinker » Sat Nov 05, 2016 2:30 am

Curmudgeon, You seem to have found your way around this site and taken it all in.
You are now dishing out bonzer advise and with links...
What can I say?
Other than so happy that you are here. ;D


Robert. ;D
There is no ONE way.
User avatar
Easydrinker
Donated to StillSmart
Donated to StillSmart
 
Posts: 5208
Joined: Fri Jun 21, 2013 7:09 pm
Location: The hills of lowland Scotland
Stills: Smart & Silly

Re: My first strip run today on alembic pot still

Postby Curmudgeon » Sun Nov 06, 2016 1:13 am

I'm still a newbie, but appreciate the welcome I was given and will help as best I can.
User avatar
Curmudgeon
Master Distiller
Master Distiller
 
Posts: 521
Joined: Tue Jul 26, 2016 10:23 pm
Stills: pot head


Return to General Chat

Who is online

Users browsing this forum: No registered users and 1 guest

User Menu

Login Form

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 72 on Mon Oct 15, 2018 1:14 pm

Users browsing this forum: No registered users and 1 guest