My first strip run today on alembic pot still
13 posts
• Page 1 of 1
My first strip run today on alembic pot still
Its started to come out at 70%, how do I do I get the recommended 40% turn the water up?
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: My first strip run today on alembic pot still
When doing a strip run you take all the spirit until it comes off @ 20%.
Always give the hardest job to the laziest person because they will always find the easiest way to do it.
-

vino-tinto - Senior Distiller

- Posts: 449
- Joined: Tue Oct 08, 2013 4:45 am
- Location: East of England
Re: My first strip run today on alembic pot still
thanks vino, its now at 50% but the spirit is coming out warm so will read higher.
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: My first strip run today on alembic pot still
Run it as an experiment. Note what goes in and comes out, adjust water flow or whatever you can. Don't drink the first or last. Sip the middle or dip finger and taste. Leave it a day to breathe. Water to 30% and run it again if it's vile.
-

Curmudgeon - Master Distiller

- Posts: 521
- Joined: Tue Jul 26, 2016 10:23 pm
- Stills: pot head
Re: My first strip run today on alembic pot still
Its not vile it tastes quite good, got just over a gallon at 55%, stopped when at 20% it was starting to taste ropey..
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: My first strip run today on alembic pot still
That's the taste of tails mate .
Not nice.
Not nice.
Rather have a full bottle in front of me
than a full frontal lobotomy
than a full frontal lobotomy
-

gaza the instructor - Master Distiller

- Posts: 1595
- Joined: Fri Mar 11, 2016 10:02 pm
- Location: sunny surrey
- Stills: s.s&t500 copper
Re: My first strip run today on alembic pot still
If that was a strip, then I can promise that it will taste better after a dilute to around 30% and a spirit run.
Make cuts,save the heads and tails for another day.
Just sayin'
Robert.
Make cuts,save the heads and tails for another day.
Just sayin'
Robert.
There is no ONE way.
-

Easydrinker - Donated to StillSmart

- Posts: 5208
- Joined: Fri Jun 21, 2013 7:09 pm
- Location: The hills of lowland Scotland
- Stills: Smart & Silly
Re: My first strip run today on alembic pot still
cheers, will save the hearts for my gin
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: My first strip run today on alembic pot still
good man 

Rather have a full bottle in front of me
than a full frontal lobotomy
than a full frontal lobotomy
-

gaza the instructor - Master Distiller

- Posts: 1595
- Joined: Fri Mar 11, 2016 10:02 pm
- Location: sunny surrey
- Stills: s.s&t500 copper
Re: My first strip run today on alembic pot still
looked for a recipe for soaking the botanicals in 2 strips to go through the alembic pot still. Just need the quantity for 2 x 5 gallon strips. What amounts to put in for thr gin run and what botanicals.
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: My first strip run today on alembic pot still
Odin's recipe is highly regarded I believe
http://homedistiller.org/forum/viewtopic.php?f=14&t=48668
Boodles
http://www.stillsmart.co.uk/forum/viewtopic.php?f=16&t=4330
Sputnik recipes
http://www.stillsmart.co.uk/forum/viewtopic.php?f=16&t=4060
http://homedistiller.org/forum/viewtopic.php?f=14&t=48668
Boodles
http://www.stillsmart.co.uk/forum/viewtopic.php?f=16&t=4330
Sputnik recipes
http://www.stillsmart.co.uk/forum/viewtopic.php?f=16&t=4060
-

Curmudgeon - Master Distiller

- Posts: 521
- Joined: Tue Jul 26, 2016 10:23 pm
- Stills: pot head
Re: My first strip run today on alembic pot still
Curmudgeon, You seem to have found your way around this site and taken it all in.
You are now dishing out bonzer advise and with links...
What can I say?
Other than so happy that you are here.
Robert.
You are now dishing out bonzer advise and with links...
What can I say?
Other than so happy that you are here.
Robert.

There is no ONE way.
-

Easydrinker - Donated to StillSmart

- Posts: 5208
- Joined: Fri Jun 21, 2013 7:09 pm
- Location: The hills of lowland Scotland
- Stills: Smart & Silly
Re: My first strip run today on alembic pot still
I'm still a newbie, but appreciate the welcome I was given and will help as best I can.
-

Curmudgeon - Master Distiller

- Posts: 521
- Joined: Tue Jul 26, 2016 10:23 pm
- Stills: pot head
13 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest