Would this work?
10 posts
• Page 1 of 1
Would this work?
Normal run per instructions on T500 column and then a spirit run on alembic pot condesor with botanical basket?
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: Would this work?
guest5234 wrote:Normal run per instructions on T500 column and then a spirit run on alembic pot condesor with botanical basket?
By normal run? ? A strip run. ??
Then spirit run for gin? ?
I tried to be normal once, worst two minutes of my life.
Of all the beautiful things in the world, only man can invent boredom
Of all the beautiful things in the world, only man can invent boredom
-

Icefever - Donated to StillSmart

- Posts: 2407
- Joined: Sun Nov 03, 2013 7:42 am
- Location: Kingdom of Mercia
Re: Would this work?
No ice a normal run as per instructions not a strip run. This is supposed to give you a finished product according to the instructions that come with the T500. Then through the pot still with botanicals.
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: Would this work?
We all know the T500 instructions are not very good but I thought that a spirit run throgh the pot still might produce something drinkable.
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: Would this work?
Hi Guest
If you have both the alembic and T500 column, then you have everything you need to make a neutral base spirit for Gin.
I would go about it in this order,
Step one : first strip using the alembic and collect everything until your output coming off the still is 30%, the result will be about 5-6 litres at around 50-55% of "low wines", do this one more time with another wash so you have more low wines.
Step two : water your low wines down from 50ish% to 30% and fill you boiler with the T500 column and run it, afterwards, make cuts so what you have is a clean neutral spirit.
This Spirit will be the base for your Gin, you need to get to this point before you think about infusing any botanicles, how you do that depends on what setup you have, I'm assuming you will be soaking you botanicles in the spirit before running it once more through the alembic, you could theoretically build a big Sputnik to go in your boiler!
If you have both the alembic and T500 column, then you have everything you need to make a neutral base spirit for Gin.
I would go about it in this order,
Step one : first strip using the alembic and collect everything until your output coming off the still is 30%, the result will be about 5-6 litres at around 50-55% of "low wines", do this one more time with another wash so you have more low wines.
Step two : water your low wines down from 50ish% to 30% and fill you boiler with the T500 column and run it, afterwards, make cuts so what you have is a clean neutral spirit.
This Spirit will be the base for your Gin, you need to get to this point before you think about infusing any botanicles, how you do that depends on what setup you have, I'm assuming you will be soaking you botanicles in the spirit before running it once more through the alembic, you could theoretically build a big Sputnik to go in your boiler!
- Anavrin
- Master Distiller

- Posts: 1468
- Joined: Fri Apr 04, 2014 12:15 pm
- Location: By the Sea
- Stills: 4” StillDragon Dash
Re: Would this work?
Brilliant, so just use the hearts from the t500 column in the final spirit run and save the heads and tails for my next wash
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: Would this work?
Yeah, although I don't ever save heads and tails from a sugar wash, I just start fresh every time
- Anavrin
- Master Distiller

- Posts: 1468
- Joined: Fri Apr 04, 2014 12:15 pm
- Location: By the Sea
- Stills: 4” StillDragon Dash
Re: Would this work?
Anavrin wrote:Yeah, although I don't ever save heads and tails from a sugar wash, I just start fresh every time
Cheers, will do the same as I want to make the best possible
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: Would this work?
just to be clear, the final spirit run on the alembic pot still after soaking botanicals I only need to throw away the first 150ml and then keep all the rest with no need for cuts?
-

guest5234 - Experienced Distiller

- Posts: 170
- Joined: Sat Oct 15, 2016 8:21 pm
Re: Would this work?
If I understand your question correctly,- you have stripped,spirit run, made cuts and run again through your botanicals?
On this third run, after throwing a little away, no further cuts are needed, UNTIL you decide that the distillate tastes awful.
And don't ask for a guide % on that, it can vary from 50% down to 30% for me
Robert.
On this third run, after throwing a little away, no further cuts are needed, UNTIL you decide that the distillate tastes awful.
And don't ask for a guide % on that, it can vary from 50% down to 30% for me
Robert.
There is no ONE way.
-

Easydrinker - Donated to StillSmart

- Posts: 5208
- Joined: Fri Jun 21, 2013 7:09 pm
- Location: The hills of lowland Scotland
- Stills: Smart & Silly
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests
