Would this work?

Info specific to the T500

Would this work?

Postby guest5234 » Wed Oct 26, 2016 8:32 pm

Normal run per instructions on T500 column and then a spirit run on alembic pot condesor with botanical basket?
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: Would this work?

Postby Icefever » Thu Oct 27, 2016 9:00 am

guest5234 wrote:Normal run per instructions on T500 column and then a spirit run on alembic pot condesor with botanical basket?


By normal run? ? A strip run. ??
Then spirit run for gin? ?
I tried to be normal once, worst two minutes of my life.

Of all the beautiful things in the world, only man can invent boredom
User avatar
Icefever
Donated to StillSmart
Donated to StillSmart
 
Posts: 2407
Joined: Sun Nov 03, 2013 7:42 am
Location: Kingdom of Mercia

Re: Would this work?

Postby guest5234 » Thu Oct 27, 2016 10:11 am

No ice a normal run as per instructions not a strip run. This is supposed to give you a finished product according to the instructions that come with the T500. Then through the pot still with botanicals.
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: Would this work?

Postby guest5234 » Thu Oct 27, 2016 10:26 am

We all know the T500 instructions are not very good but I thought that a spirit run throgh the pot still might produce something drinkable.
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: Would this work?

Postby Anavrin » Thu Oct 27, 2016 10:43 am

Hi Guest
If you have both the alembic and T500 column, then you have everything you need to make a neutral base spirit for Gin.

I would go about it in this order,

Step one : first strip using the alembic and collect everything until your output coming off the still is 30%, the result will be about 5-6 litres at around 50-55% of "low wines", do this one more time with another wash so you have more low wines.

Step two : water your low wines down from 50ish% to 30% and fill you boiler with the T500 column and run it, afterwards, make cuts so what you have is a clean neutral spirit.

This Spirit will be the base for your Gin, you need to get to this point before you think about infusing any botanicles, how you do that depends on what setup you have, I'm assuming you will be soaking you botanicles in the spirit before running it once more through the alembic, you could theoretically build a big Sputnik to go in your boiler!
Image
Anavrin
Master Distiller
Master Distiller
 
Posts: 1468
Joined: Fri Apr 04, 2014 12:15 pm
Location: By the Sea
Stills: 4” StillDragon Dash

Re: Would this work?

Postby guest5234 » Thu Oct 27, 2016 2:00 pm

Brilliant, so just use the hearts from the t500 column in the final spirit run and save the heads and tails for my next wash
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: Would this work?

Postby Anavrin » Thu Oct 27, 2016 5:15 pm

Yeah, although I don't ever save heads and tails from a sugar wash, I just start fresh every time
Image
Anavrin
Master Distiller
Master Distiller
 
Posts: 1468
Joined: Fri Apr 04, 2014 12:15 pm
Location: By the Sea
Stills: 4” StillDragon Dash

Re: Would this work?

Postby guest5234 » Thu Oct 27, 2016 5:21 pm

Anavrin wrote:Yeah, although I don't ever save heads and tails from a sugar wash, I just start fresh every time

Cheers, will do the same as I want to make the best possible
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: Would this work?

Postby guest5234 » Mon Nov 14, 2016 7:07 pm

just to be clear, the final spirit run on the alembic pot still after soaking botanicals I only need to throw away the first 150ml and then keep all the rest with no need for cuts?
User avatar
guest5234
Experienced Distiller
Experienced Distiller
 
Posts: 170
Joined: Sat Oct 15, 2016 8:21 pm

Re: Would this work?

Postby Easydrinker » Mon Nov 14, 2016 9:52 pm

If I understand your question correctly,- you have stripped,spirit run, made cuts and run again through your botanicals?
On this third run, after throwing a little away, no further cuts are needed, UNTIL you decide that the distillate tastes awful.
And don't ask for a guide % on that, it can vary from 50% down to 30% for me :D

Robert.
There is no ONE way.
User avatar
Easydrinker
Donated to StillSmart
Donated to StillSmart
 
Posts: 5208
Joined: Fri Jun 21, 2013 7:09 pm
Location: The hills of lowland Scotland
Stills: Smart & Silly


Return to T500

Who is online

Users browsing this forum: No registered users and 0 guests

User Menu

Login Form

Who is online

In total there are 0 users online :: 0 registered, 0 hidden and 0 guests (based on users active over the past 5 minutes)
Most users ever online was 72 on Mon Oct 15, 2018 1:14 pm

Users browsing this forum: No registered users and 0 guests