power connectors

[Mash]

I want to drill a stainless kettle leg and add a power connector.
I have opted for a round hole not square - as it will be much easier to cut in 2mm SS
So I need a cable plug and a socket mount.
Spec 16A /240AC. 3 pole (single phase)

I have only found these and am left feeling these is better out there..........

https://sinolec.co.uk/en/rewirable-sock ... &results=2

Any ideas chaps?

[myles]

I use those for 3 kw 13 amp elements. I am using the bigger version on my 6 kw element.
Mine is actually a Neutrik powercon NAC3FC-HC 32 amp 250 volt

controller 2 power.png

I get mine from RS Components
899-7384 for the cable mount plug
899-7387 for the panel mount socket

[Mash]

I want to relocate the mains socket on the Braumeister. Cannot stand keep fumbling about underneath.

Elem is 2.7kw so well in.

Thanks Bud. Part numbers mucho appreciated.